# KOKONI EC2: specs, SimplyPrint compatibility and setup

> **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong.

- By KOKONI, China
- Launched October 2023
- Canonical page: https://simplyprint.io/compatibility/kokoni-ec2

## KOKONI EC2 at a glance

The KOKONI EC2 is a 3D printer by KOKONI with a 100 x 100 x 60 mm build volume.

- Build volume: 100 x 100 x 60 mm
- Enclosure: Fully enclosed
- Max print speed: 100 mm/s
- Prints well: PLA
- Built-in camera: Yes
- Connectivity: Wi-Fi

## Connect the KOKONI EC2 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not expected to work |  |  |
| Klipper (Moonraker) | Not expected to work |  | Closed app ecosystem (KOKONI 3D app, OTA updates); no Klipper/Moonraker documented. ([Source](https://www.kokoni3d.com/products/kokoni-ec2)) |
| OctoPrint (Directly, over USB) | Not expected to work |  | Printing is through the KOKONI app over Bluetooth/wireless; no USB printing documented. ([Source](https://www.kokoni3d.com/products/kokoni-ec2)) |

## What slicer to use for the KOKONI EC2

None of the slicers in SimplyPrint's cloud can slice for the KOKONI EC2 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the KOKONI EC2 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the KOKONI EC2 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the KOKONI EC2 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the KOKONI EC2 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the KOKONI EC2 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the KOKONI EC2 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the KOKONI EC2 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the KOKONI EC2.

## KOKONI EC2 specifications: bed size, print height and more

### Size

- Build volume: 100 x 100 x 60 mm
- Bed type: Square
- Bed size: 100 x 100 mm
- Max print height: 60 mm

### Printing

- Enclosure: Fully enclosed
- Max print speed: 100 mm/s
- Max extruder temperature: 260 °C
- Has heated bed: No
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: No
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi
- Built-in camera: Yes
- Supports serial printing: Unknown
- Shipped firmware: Unknown

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: KOKONI
- Printer model name: EC2
- Made by a company from: China
- Launched: October 2023
- Still made: Yes

[Read more by the manufacturer](https://www.kokoni3d.com/products/kokoni-ec2)

## What filament can the KOKONI EC2 print?

Filament compatibility for the KOKONI EC2: the materials KOKONI lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | With care | Marginal - PETG prefers a hotter bed (~70-80C) than this printer reaches. |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

## Printers like the KOKONI EC2 that work with SimplyPrint

- [Easythreed Nano](https://simplyprint.io/compatibility/easythreed-nano): Compatible, 90 x 90 x 110 mm, Similar build volume
- [Turnigy Fabrikator Mini](https://simplyprint.io/compatibility/turnigy-fabrikator-mini): Compatible, 80 x 80 x 80 mm, Similar build volume
- [Toybox Toybox](https://simplyprint.io/compatibility/toybox-toybox): Compatible, 70 x 80 x 90 mm, Similar build volume

## Where to buy the KOKONI EC2

- [KOKONI's global store](https://simplyprint.io/buy/8321) (Official store): $239.00 (Price at KOKONI, checked October 23, 2026)

## Frequently asked questions

### Is the KOKONI EC2 compatible with SimplyPrint?

To our knowledge the KOKONI EC2 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

### What slicer should I use for the KOKONI EC2?

None of the slicers in SimplyPrint's cloud can slice for the KOKONI EC2 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the KOKONI EC2 print?

KOKONI lists PLA for the EC2.

### What is the KOKONI EC2's bed size and build volume?

The KOKONI EC2 has a 100 x 100 mm print bed and prints up to 60 mm tall, a build volume of about 100 x 100 x 60 mm. See the full specifications table above for bed type, temperatures and more.

### When did the KOKONI EC2 come out?

KOKONI launched the EC2 in October 2023.

### Where can I buy the KOKONI EC2?

From KOKONI's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.