# Kidoodle MiniBox A1: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By Kidoodle, China
- Launched July 2024
- Canonical page: https://simplyprint.io/compatibility/kidoodle-minibox-a1

## Kidoodle MiniBox A1 at a glance

The Kidoodle MiniBox A1 is a 3D printer by Kidoodle with a 100 x 100 x 90 mm build volume.

- Build volume: 100 x 100 x 90 mm
- Enclosure: Fully enclosed
- Max print speed: 600 mm/s
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA)
- Connectivity: Wi-Fi, USB

## Connect the Kidoodle MiniBox A1 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| OctoPrint (Directly, over USB) | Not confirmed yet - help us find out |  | Marlin 2.0, but whether its USB is a computer (serial) port or a thumb-drive port is not documented. ([Source](https://3dwithus.com/kidoodle-minibox-a1-review-kids-3d-printer-with-safety-features)) |
| Klipper (Moonraker) | Not compatible |  | Ships Marlin 2.0 with an app/Wi-Fi workflow; no Klipper. ([Source](https://3dwithus.com/kidoodle-minibox-a1-review-kids-3d-printer-with-safety-features)); Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification |

- [Help us confirm](https://simplyprint.io/compatibility/kidoodle-minibox-a1/confirm)

## What slicer to use for the Kidoodle MiniBox A1

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Kidoodle MiniBox A1, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Kidoodle MiniBox A1 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Kidoodle MiniBox A1 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Kidoodle MiniBox A1 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Kidoodle MiniBox A1 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Kidoodle MiniBox A1 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Kidoodle MiniBox A1 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Kidoodle MiniBox A1 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Kidoodle MiniBox A1.

## Kidoodle MiniBox A1 specifications: bed size, print height and more

### Size

- Build volume: 100 x 100 x 90 mm
- Bed type: Square
- Bed size: 100 x 100 mm
- Max print height: 90 mm

### Printing

- Enclosure: Fully enclosed
- Max print speed: 600 mm/s
- Max extruder temperature: 250 °C
- Has heated bed: Yes
- Max bed temperature: 100 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, USB
- Supports serial printing: Unknown
- Shipped firmware: Marlin

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Kidoodle
- Printer model name: MiniBox A1
- Made by a company from: China
- Launched: July 2024
- Still made: Yes

[Read more by the manufacturer](https://uk.store.sunlu.com/products/kidoodle-minibox-a1-3d-printer-for-kids-unleash-creativity-with-kidoodle)

## What filament can the Kidoodle MiniBox A1 print?

Filament compatibility for the Kidoodle MiniBox A1: the materials Kidoodle lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | Enclosed, with a hot enough hotend and bed: ABS and ASA print well. |
| Nylon (PA) | Good | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

## Printers like the Kidoodle MiniBox A1 that work with SimplyPrint

- [Bambu Lab P1S](https://simplyprint.io/compatibility/bambu-lab-p1s): Verified by SimplyPrint, 256 x 256 x 256 mm, Also prints ABS & ASA, Nylon (PA)
- [Bambu Lab P2S Combo](https://simplyprint.io/compatibility/bambu-lab-p2s-combo): Verified by SimplyPrint, 256 x 256 x 256 mm, Also prints ABS & ASA, Nylon (PA)
- [Creality K1 Max](https://simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Also prints ABS & ASA, Nylon (PA)
- [Creality K1C](https://simplyprint.io/compatibility/creality-k1c): Compatible, 220 x 220 x 250 mm, Also prints ABS & ASA, Nylon (PA)

## Where to buy the Kidoodle MiniBox A1

- [Kidoodle for the UK](https://simplyprint.io/buy/8405) (Official store)

## Frequently asked questions

### Is the Kidoodle MiniBox A1 compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Kidoodle MiniBox A1, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the Kidoodle MiniBox A1?

Cura, PrusaSlicer and OrcaSlicer all work with the Kidoodle MiniBox A1, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the Kidoodle MiniBox A1?

Yes, but OrcaSlicer has no built-in profile for the Kidoodle MiniBox A1 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the Kidoodle MiniBox A1 print?

Kidoodle lists PLA for the MiniBox A1.

### What is the Kidoodle MiniBox A1's bed size and build volume?

The Kidoodle MiniBox A1 has a 100 x 100 mm print bed and prints up to 90 mm tall, a build volume of about 100 x 100 x 90 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Kidoodle MiniBox A1 come out?

Kidoodle launched the MiniBox A1 in July 2024.

### Where can I buy the Kidoodle MiniBox A1?

From Kidoodle's own store, which has shops for the UK. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.