# Jubilee Jubilee: specs, SimplyPrint compatibility and setup

> **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

- By Jubilee, USA
- Launched October 2019
- Canonical page: https://simplyprint.io/compatibility/jubilee-jubilee

## Jubilee Jubilee at a glance

The Jubilee Jubilee is a 3D printer by Jubilee with a 300 x 300 x 300 mm build volume.

- Build volume: 300 x 300 x 300 mm
- Enclosure: Open frame
- Motion system: CoreXY
- Prints well: PLA, PETG, TPU & flexibles
- Connectivity: Wi-Fi, Ethernet

## Connect the Jubilee Jubilee to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| Duet (RepRapFirmware) | Compatible | A computer or Raspberry Pi on the same network that stays on, running the SimplyPrint Client | Designed around a Duet board running RepRapFirmware; the project ships Duet config files. ([Source](https://github.com/machineagency/jubilee)) |
| OctoPrint (Directly, over USB) | Not confirmed yet - help us find out |  | Duet/RRF is driven from Duet Web Control; no documented OctoPrint use. ([Source](https://jubilee3d.com/index.php?title=Specs)) |
| Klipper (Moonraker) | Not compatible |  | Stock design is Duet/RRF; community Klipper configs exist (Duet 2 + Duex5). ([Source](https://github.com/Xonman/JubileeKlipper)); Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification |

- [How to set up SimplyPrint on Jubilee Jubilee](https://simplyprint.io/setup-guide/jubilee/jubilee.md)

### What works with SimplyPrint

Connected through Duet (RepRapFirmware), SimplyPrint supports everything the Jubilee Jubilee lets other software do: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint.

## What slicer to use for the Jubilee Jubilee

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Jubilee Jubilee, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Jubilee Jubilee · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Jubilee Jubilee · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Jubilee Jubilee · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Jubilee Jubilee · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Jubilee Jubilee · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Jubilee Jubilee · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Jubilee Jubilee · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Jubilee Jubilee.

## The app for the Jubilee Jubilee

SimplyPrint works as the Jubilee Jubilee's app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the Jubilee Jubilee to SimplyPrint, free](https://simplyprint.io/setup-guide/jubilee/jubilee) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the Jubilee Jubilee

**CoreXY printers push their prints off.** The Jubilee Jubilee's bed only moves up and down, so the usual way to automate it is a G-code routine that lets the toolhead push the cooled print off the front of the plate before the next job starts.

### Ways to automate it

- [Push prints off with the toolhead](https://simplyprint.io/features/autoprint/push-off): On a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## Jubilee Jubilee specifications: bed size, print height and more

### Size

- Build volume: 300 x 300 x 300 mm
- Bed type: Square
- Bed size: 300 x 300 mm
- Max print height: 300 mm

### Printing

- Enclosure: Open frame
- Motion system: CoreXY
- Max extruder temperature: 300 °C
- Has heated bed: Yes
- Max bed temperature: 130 °C
- Number of nozzles: 1
- Toolheads: 4
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: Yes
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, Ethernet
- Supports serial printing: Unknown
- Shipped firmware: RepRapFirmware (Duet)

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Jubilee
- Printer model name: Jubilee
- Made by a company from: USA
- Launched: October 2019
- Still made: Yes

[Read more by the manufacturer](https://jubilee3d.com/index.php?title=Main_Page)

## What filament can the Jubilee Jubilee print?

Filament compatibility for the Jubilee Jubilee: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the Jubilee Jubilee

Filaments the Jubilee Jubilee prints well, Jubilee's own first, then the best known.

- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C
- [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C
- [Bambu Lab PETG Basic](https://simplyprint.io/filaments/bambu-lab/petg-basic): PETG, 230-260 °C
- [Bambu Lab PETG HF](https://simplyprint.io/filaments/bambu-lab/petg-hf): PETG, 230-260 °C

## Compare the Jubilee Jubilee with similar printers

- [FLSUN Super Racer](https://simplyprint.io/compatibility/flsun-super-racer): Compatible, 260 x 260 x 330 mm, Similar build volume
- [Sovol SV04](https://simplyprint.io/compatibility/sovol-sv04): Compatible, 300 x 300 x 400 mm, Similar build volume
- [Creality Ender 7](https://simplyprint.io/compatibility/creality-ender-7): Compatible, 250 x 250 x 300 mm, Similar build volume
- [Longer LK 5 Pro](https://simplyprint.io/compatibility/longer-lk-5-pro): Compatible, 300 x 300 x 400 mm, Similar build volume
- [Compare the Jubilee Jubilee with other printers](https://simplyprint.io/compatibility/compare?compare=jubilee-jubilee#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the Jubilee Jubilee compatible with SimplyPrint?

Yes. You can connect the Jubilee Jubilee to SimplyPrint via Duet (RepRapFirmware), then slice, queue, start and monitor prints from your browser or the mobile app.

### How do I connect the Jubilee Jubilee to SimplyPrint?

Follow our step-by-step setup guide for the Jubilee Jubilee. It shows how to connect it via Duet (RepRapFirmware), what you need for each, and which to pick.

### What slicer should I use for the Jubilee Jubilee?

Cura, PrusaSlicer and OrcaSlicer all work with the Jubilee Jubilee, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the Jubilee Jubilee?

Yes, but OrcaSlicer has no built-in profile for the Jubilee Jubilee that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the Jubilee Jubilee print?

Based on its specs (hotend up to 300C, heated bed up to 130C), the Jubilee Jubilee handles PLA, PETG, or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.

### Does the Jubilee Jubilee work with OctoPrint or Klipper?

Not that we know of, but you don't need either: SimplyPrint connects to the Jubilee Jubilee via Duet (RepRapFirmware).

### What is the Jubilee Jubilee's bed size and build volume?

The Jubilee Jubilee has a 300 x 300 mm print bed and prints up to 300 mm tall, a build volume of about 300 x 300 x 300 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Jubilee Jubilee come out?

Jubilee launched the Jubilee in October 2019.

### Can the Jubilee Jubilee eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.