# Intamsys FUNMAT PRO 610HT: specs, SimplyPrint compatibility and setup

> **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong.

- By Intamsys, China
- Launched February 2019
- Canonical page: https://simplyprint.io/compatibility/intamsys-funmat-pro-610ht

## Intamsys FUNMAT PRO 610HT at a glance

The Intamsys FUNMAT PRO 610HT is a 3D printer by Intamsys with a 610 x 508 x 508 mm build volume.

- Build volume: 610 x 508 x 508 mm
- Enclosure: Fully enclosed
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)

## Connect the Intamsys FUNMAT PRO 610HT to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not expected to work |  |  |
| Klipper (Moonraker) | Not expected to work |  | 1.4-tonne industrial machine with servo drives and a safety PLC, run through INTAMSUITE; no sign of Klipper or Moonraker. ([Source](https://www.intamsys.com/funmat-pro-610-ht-3d-printer)) |
| OctoPrint (Directly, over USB) | Not expected to work |  | Industrial controller and workflow; no USB serial printing documented. ([Source](https://www.intamsys.com/funmat-pro-610-ht-3d-printer)) |

## What slicer to use for the Intamsys FUNMAT PRO 610HT

None of the slicers in SimplyPrint's cloud can slice for the Intamsys FUNMAT PRO 610HT that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Intamsys FUNMAT PRO 610HT · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Intamsys FUNMAT PRO 610HT · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Intamsys FUNMAT PRO 610HT · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Intamsys FUNMAT PRO 610HT · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Intamsys FUNMAT PRO 610HT · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Intamsys FUNMAT PRO 610HT · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Intamsys FUNMAT PRO 610HT · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Intamsys FUNMAT PRO 610HT.

## Intamsys FUNMAT PRO 610HT specifications: bed size, print height and more

### Size

- Build volume: 610 x 508 x 508 mm
- Bed type: Square
- Bed size: 610 x 508 mm
- Max print height: 508 mm

### Printing

- Enclosure: Fully enclosed
- Max extruder temperature: 500 °C
- Has heated bed: Yes
- Max bed temperature: 100 °C
- Heated chamber: Up to 300 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No

### Connecting

- Supports serial printing: Unknown
- Shipped firmware: Unknown

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Intamsys
- Printer model name: FUNMAT PRO 610HT
- Made by a company from: China
- Launched: February 2019
- Still made: Yes

[Read more by the manufacturer](https://www.intamsys.com/funmat-pro-610-ht-3d-printer)

## What filament can the Intamsys FUNMAT PRO 610HT print?

Filament compatibility for the Intamsys FUNMAT PRO 610HT: the materials Intamsys lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
| High-temperature (PEI, PEEK, PEKK) | Great | On the maker's list of materials for this printer. |

## Printers like the Intamsys FUNMAT PRO 610HT that work with SimplyPrint

- [Sovol SV08 Max (Heat Chamber)](https://simplyprint.io/compatibility/sovol-sv08-max-heat-chamber): Compatible, 500 x 500 x 450 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Kentstrapper Bold 755](https://simplyprint.io/compatibility/kentstrapper-bold-755): Compatible, 700 x 500 x 500 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [WASP 4070 FX](https://simplyprint.io/compatibility/wasp-4070-fx): Compatible, 400 x 400 x 700 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [WASP 4070 ZX](https://simplyprint.io/compatibility/wasp-4070-zx): Compatible, 400 x 400 x 700 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Where to buy the Intamsys FUNMAT PRO 610HT

- [Intamsys's global store](https://simplyprint.io/buy/8317) (Official store)

## Frequently asked questions

### Is the Intamsys FUNMAT PRO 610HT compatible with SimplyPrint?

To our knowledge the Intamsys FUNMAT PRO 610HT is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

### What slicer should I use for the Intamsys FUNMAT PRO 610HT?

None of the slicers in SimplyPrint's cloud can slice for the Intamsys FUNMAT PRO 610HT that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the Intamsys FUNMAT PRO 610HT print?

Intamsys lists PLA, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the FUNMAT PRO 610HT.

### What is the Intamsys FUNMAT PRO 610HT's bed size and build volume?

The Intamsys FUNMAT PRO 610HT has a 610 x 508 mm print bed and prints up to 508 mm tall, a build volume of about 610 x 508 x 508 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Intamsys FUNMAT PRO 610HT come out?

Intamsys launched the FUNMAT PRO 610HT in February 2019.

### Where can I buy the Intamsys FUNMAT PRO 610HT?

From Intamsys's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.