# Hellbot Magna SE PRO: specs, SimplyPrint compatibility and setup

> **Expected to work** (Most likely). Not confirmed yet, but we expect it to work like the Hellbot Magna SE.

- By Hellbot, Argentina
- Launched 2023
- Canonical page: https://simplyprint.io/compatibility/hellbot-magna-se-pro

## Hellbot Magna SE PRO at a glance

The Hellbot Magna SE PRO is a 3D printer by Hellbot with a 230 x 230 x 250 mm build volume.

- Build volume: 230 x 230 x 250 mm
- Enclosure: Open frame
- Max print speed: 150 mm/s
- Motion system: Bed slinger
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA
- Connectivity: Wi-Fi, USB, SD card

## Connect the Hellbot Magna SE PRO to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Expected to work |  | Through OctoPrint |
| OctoPrint (Directly, over USB) | Expected to work | A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable | Maker lists a USB cable connection; like the Magna SE. ([Source](https://hellbot.com.ar/impresoras-3d/2-hellbot-magna-se-pro-impresora-3d-7798391342689.html)); Expected to work like the Hellbot Magna SE |
| Klipper (Moonraker) | Not compatible |  | Ships a 32-bit MKS Robin Nano board with the maker's touchscreen firmware; no Klipper. ([Source](https://hellbot.com.ar/impresoras-3d/2-hellbot-magna-se-pro-impresora-3d-7798391342689.html)); Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification |

- [How to set up SimplyPrint on Hellbot Magna SE PRO](https://simplyprint.io/setup-guide/hellbot/magna-se-pro.md)
- [How to set up OctoPrint on Hellbot Magna SE PRO](https://simplyprint.io/compatibility/hellbot-magna-se-pro/octoprint-setup)

- [Help us confirm](https://simplyprint.io/compatibility/hellbot-magna-se-pro/confirm)

### What works with SimplyPrint

Connected through OctoPrint, SimplyPrint is expected to support everything the Hellbot Magna SE PRO lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

## What slicer to use for the Hellbot Magna SE PRO

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Hellbot Magna SE PRO, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Hellbot Magna SE PRO · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Hellbot Magna SE PRO · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Hellbot Magna SE PRO · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Hellbot Magna SE PRO · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Hellbot Magna SE PRO · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Hellbot Magna SE PRO · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Hellbot Magna SE PRO · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Hellbot Magna SE PRO.

## The app for the Hellbot Magna SE PRO

SimplyPrint works as the Hellbot Magna SE PRO's app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the Hellbot Magna SE PRO to SimplyPrint, free](https://simplyprint.io/setup-guide/hellbot/magna-se-pro) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the Hellbot Magna SE PRO

**Bed slingers are the easiest to automate.** The Hellbot Magna SE PRO moves its bed back and forth, so its plate comes out to the front of the printer. That's what plate swappers like these use: they take the finished plate off and slide a fresh one on. Without a kit, a G-code routine can push cooled prints off with the toolhead. For example: [JobOx](https://simplyprint.io/features/autoprint/jobox), [swapmod](https://simplyprint.io/features/autoprint/swapmod).

### Ways to automate it

- [Push prints off with the toolhead](https://simplyprint.io/features/autoprint/push-off): On a bed slinger, a G-code routine can sweep the cooled print off the bed before the next job starts.
- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## Hellbot Magna SE PRO specifications: bed size, print height and more

### Size

- Build volume: 230 x 230 x 250 mm
- Bed type: Square
- Bed size: 230 x 230 mm
- Max print height: 250 mm

### Printing

- Enclosure: Open frame
- Motion system: Bed slinger
- Max print speed: 150 mm/s
- Max extruder temperature: 260 °C
- Has heated bed: Yes
- Max bed temperature: 100 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, USB, SD card
- Prints from: microSD card, USB stick
- Supports serial printing: Unknown
- Shipped firmware: Unknown

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Hellbot
- Printer model name: Magna SE PRO
- Made by a company from: Argentina
- Launched: 2023

[Read more by the manufacturer](https://hellbot.com.ar/impresoras-3d/2-hellbot-magna-se-pro-impresora-3d-7798391342689.html)

## What filament can the Hellbot Magna SE PRO print?

Filament compatibility for the Hellbot Magna SE PRO: the materials Hellbot lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the Hellbot Magna SE PRO

Filaments the Hellbot Magna SE PRO prints well, Hellbot's own first, then the best known.

- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 200-240 °C
- [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C
- [Bambu Lab ABS](https://simplyprint.io/filaments/bambu-lab/abs): ABS, 240-270 °C
- [Bambu Lab ASA](https://simplyprint.io/filaments/bambu-lab/asa): ASA, 240-270 °C

## Compare the Hellbot Magna SE PRO with similar printers

- [Hellbot Magna SE](https://simplyprint.io/compatibility/hellbot-magna-se): Compatible, 230 x 230 x 250 mm, Also by Hellbot · Similar build volume · Also prints ABS & ASA
- [Creality Ender-3 V3 KE](https://simplyprint.io/compatibility/creality-ender-3-v3-ke): Compatible, 220 x 220 x 240 mm, Similar build volume · Also prints ABS & ASA
- [Creality Ender-3 S1 Pro](https://simplyprint.io/compatibility/creality-ender-3-s1-pro): Compatible, 220 x 220 x 270 mm, Similar build volume · Also prints ABS & ASA
- [Prusa MK4S](https://simplyprint.io/compatibility/prusa-mk4s): Compatible, 250 x 210 x 220 mm, Similar build volume · Also prints ABS & ASA
- [Compare the Hellbot Magna SE PRO with other printers](https://simplyprint.io/compatibility/compare?compare=hellbot-magna-se-pro#choose)

## Where to buy the Hellbot Magna SE PRO

- [Hellbot's global store](https://simplyprint.io/buy/8312) (Official store)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the Hellbot Magna SE PRO compatible with SimplyPrint?

Most likely. We expect the Hellbot Magna SE PRO to connect to SimplyPrint via OctoPrint, but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.

### How do I connect the Hellbot Magna SE PRO to SimplyPrint?

Follow our step-by-step setup guide for the Hellbot Magna SE PRO. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

### What slicer should I use for the Hellbot Magna SE PRO?

Cura, PrusaSlicer and OrcaSlicer all work with the Hellbot Magna SE PRO, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the Hellbot Magna SE PRO?

Yes, but OrcaSlicer has no built-in profile for the Hellbot Magna SE PRO that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the Hellbot Magna SE PRO print?

Hellbot lists PLA, PETG, TPU & flexibles and ABS & ASA for the Magna SE PRO.

### Does the Hellbot Magna SE PRO work with OctoPrint or Klipper?

The Hellbot Magna SE PRO works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the Hellbot Magna SE PRO's bed size and build volume?

The Hellbot Magna SE PRO has a 230 x 230 mm print bed and prints up to 250 mm tall, a build volume of about 230 x 230 x 250 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Hellbot Magna SE PRO come out?

Hellbot launched the Magna SE PRO in 2023.

### Can the Hellbot Magna SE PRO eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.

### Where can I buy the Hellbot Magna SE PRO?

From Hellbot's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.