# Geeetech Mizar Pro: specs, SimplyPrint compatibility and setup > **Expected to work** (Most likely). Not confirmed yet, but we expect it to work like the Geeetech Mizar M. - By Geeetech, China - Launched 2022 - Canonical page: https://simplyprint.io/compatibility/geeetech-mizar-pro ## Geeetech Mizar Pro at a glance The Geeetech Mizar Pro is a 3D printer by Geeetech with a 220 x 220 x 260 mm build volume. - Build volume: 220 x 220 x 260 mm - Enclosure: Open frame - Max print speed: 150 mm/s - Prints well: PLA, PETG, ABS & ASA - Connectivity: USB, SD card ## Connect the Geeetech Mizar Pro to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint | Expected to work | | Through OctoPrint | | OctoPrint (Directly, over USB) | Expected to work | A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable | Marlin 2.0.7 with a USB cable connection (wiki), like the Mizar M. ([Source](https://wiki.geeetech.com/index.php/Geeetech_Mizar_Pro_3D_Printer)); Expected to work like the Geeetech Mizar M | | Klipper (Moonraker) | Not compatible | | Ships Marlin 2.0.7; Klipper only after you install it. ([Source](https://github.com/Geeetech3D/Mizar-Pro)); Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification | - [How to set up SimplyPrint on Geeetech Mizar Pro](https://simplyprint.io/setup-guide/geeetech/mizar-pro.md) - [How to set up OctoPrint on Geeetech Mizar Pro](https://simplyprint.io/compatibility/geeetech-mizar-pro/octoprint-setup) - [Help us confirm](https://simplyprint.io/compatibility/geeetech-mizar-pro/confirm) ### What works with SimplyPrint Connected through OctoPrint, SimplyPrint is expected to support everything the Geeetech Mizar Pro lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs. ## What slicer to use for the Geeetech Mizar Pro None of the slicers in SimplyPrint's cloud has a ready-made profile for the Geeetech Mizar Pro, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match. - [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Geeetech Mizar Pro · Runs in the SimplyPrint cloud - [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Geeetech Mizar Pro · Runs in the SimplyPrint cloud - [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Geeetech Mizar Pro · Runs in the SimplyPrint cloud - [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Geeetech Mizar Pro · Runs in the SimplyPrint cloud - [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Geeetech Mizar Pro · Runs in the SimplyPrint cloud - [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Geeetech Mizar Pro · Runs in the SimplyPrint cloud - [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Geeetech Mizar Pro · Runs in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Geeetech Mizar Pro. ## The app for the Geeetech Mizar Pro Geeetech doesn't make an app for the Geeetech Mizar Pro. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud. - An app for iPhone and Android, the same in any browser, and a slicer in the cloud. - More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team. - Printers from many brands in one place, side by side. - Hosted in Frankfurt, Germany, under the GDPR. [Connect the Geeetech Mizar Pro to SimplyPrint, free](https://simplyprint.io/setup-guide/geeetech/mizar-pro) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev) ## Automate the Geeetech Mizar Pro ### Ways to automate it - [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print. - [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system. - [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job. [How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up. ## Geeetech Mizar Pro specifications: bed size, print height and more ### Size - Build volume: 220 x 220 x 260 mm - Bed type: Square - Bed size: 220 x 220 mm - Max print height: 260 mm ### Printing - Enclosure: Open frame - Max print speed: 150 mm/s - Max extruder temperature: 250 °C - Has heated bed: Yes - Max bed temperature: 110 °C - Number of nozzles: 1 - Toolheads: 1 - Direct drive: No - Probing tool / Auto Bed Leveling: Yes - Filament width: 1.75 mm ### Multi-material - Toolchanger or hotend changer: No - IDEX (independent dual extruders): No ### Connecting - Connectivity: USB, SD card - Prints from: microSD card - Supports serial printing: Yes - Shipped firmware: Marlin ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) ### The printer - Printer manufacturer / brand: Geeetech - Printer model name: Mizar Pro - Made by a company from: China - Launched: 2022 [Read more by the manufacturer](https://wiki.geeetech.com/index.php/Geeetech_Mizar_Pro_3D_Printer) ## What filament can the Geeetech Mizar Pro print? Filament compatibility for the Geeetech Mizar Pro: the materials Geeetech lists for it. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | On the maker's list of materials for this printer. | | PETG | Great | On the maker's list of materials for this printer. | | TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. | | ABS & ASA | Great | On the maker's list of materials for this printer. | | Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. | | Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. | | Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. | ### Best filament for the Geeetech Mizar Pro Filaments the Geeetech Mizar Pro prints well, Geeetech's own first, then the best known. - [Geeetech Matte PLA](https://simplyprint.io/filaments/geeetech/matte-pla): PLA, 190-220 °C - [Geeetech PETG](https://simplyprint.io/filaments/geeetech/petg): PETG, 220-240 °C - [Geeetech PLA](https://simplyprint.io/filaments/geeetech/pla): PLA, 185-215 °C - [Geeetech PLA Marble](https://simplyprint.io/filaments/geeetech/marble-pla): PLA, 185-215 °C - [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C - [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C - [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 200-240 °C - [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C ## Compare the Geeetech Mizar Pro with similar printers - [Geeetech Mizar S](https://simplyprint.io/compatibility/geeetech-mizar-s): Expected to work, 255 x 255 x 260 mm, Also by Geeetech · Similar build volume · Also prints ABS & ASA - [Creality Ender-3 V3 KE](https://simplyprint.io/compatibility/creality-ender-3-v3-ke): Compatible, 220 x 220 x 240 mm, Similar build volume · Also prints ABS & ASA - [Creality Ender-3 S1 Pro](https://simplyprint.io/compatibility/creality-ender-3-s1-pro): Compatible, 220 x 220 x 270 mm, Similar build volume · Also prints ABS & ASA - [Prusa MK4S](https://simplyprint.io/compatibility/prusa-mk4s): Compatible, 250 x 210 x 220 mm, Similar build volume · Also prints ABS & ASA - [Compare the Geeetech Mizar Pro with other printers](https://simplyprint.io/compatibility/compare?compare=geeetech-mizar-pro#choose) ## About Geeetech Geeetech (HK GETECH Co., Limited, with its office at Shenzhen Getech Technology) is a Chinese 3D printer and filament maker that says it has worked on 3D printers since 2011. It made a long line of budget printers, from Prusa i3 kits through the A10/A20/A30, Mizar and Thunder series, and now sells the compact M1 and M1S for children and beginners alongside a large filament range. - Founded: 2011 - Headquarters: Shenzhen, China (company registered in Hong Kong) - Ownership: HK GETECH Co., Limited; China office Shenzhen Getech Technology Co., Ltd - Website: https://www.geeetech.com Openness: Mostly open (3.6 of 5) Mostly open, with a caveat: the older printers came with published Marlin source and schematics, while the current M1 line has closed firmware but still runs locally with any filament and open slicers. - Firmware and custom firmware (3 of 5): Geeetech published Marlin-based firmware source and board schematics for its earlier printers on GitHub (Geeetech3D) and its download centre, including open-source files for the Mizar S updated until 2024. For the current M1 and M1S it offers firmware binaries only; we found no source. - Local control and integrations (4 of 5): The M1 Mini prints from a TF card or over USB with no account. The M1S adds Wi-Fi and the Geeetech app for printing from its model library 'anywhere', a remote feature that runs through Geeetech's app. Geeetech documents no network interface for other software, and for these models it offers only firmware binaries. - Third-party filament, slicers and parts (4 of 5): Any 1.75 mm filament (PLA and TPU on the M1), and Geeetech publishes Cura and OrcaSlicer profiles for it. Nozzles and hot-end parts for the M1 are Geeetech's own, sold in its store. - Repairs and spare parts (4 of 5): Geeetech sells M1 parts (hotbed, nozzles, hot-end components, PEI plate) and posts videos on replacing the nozzle and the motherboard; schematics for older boards are published. - Community and documentation (3 of 5): A long-running wiki, a download centre with manuals, firmware, profiles and videos per model, and GitHub repositories. Independent coverage of the current M1 line is scarce. ### Pros - Inexpensive compact printers aimed at children and beginners. - Any 1.75 mm filament, with Cura and OrcaSlicer profiles published. - Spare nozzles, hotbeds and hot-end parts for the M1, plus repair videos. - Downloads (manuals, firmware) kept online for printers going back many years. ### Cons - No published firmware source for the current M1 and M1S. - The M1S's remote printing runs through Geeetech's phone app; we found no privacy terms covering the app. - Small 100 x 110 x 100 mm build volume on the M1. - Little independent testing of the current models that we could find. ### Track record - November 2025: Geeetech added the M1S, an M1 with Wi-Fi and a phone app; its app was posted in September 2025 and its quick guide in November 2025. - February 2025: Geeetech released the M1 mini printer for children and beginners; its first setup and maintenance videos were posted in February 2025 and its manual in March 2025. - October 2022: Geeetech published open-source files for the Mizar S on GitHub, updated until March 2024; files for the Mizar and Mizar Pro followed in November 2022. How Geeetech compares with every other brand: https://simplyprint.io/articles/best-3d-printer Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. ## Frequently asked questions ### Is the Geeetech Mizar Pro compatible with SimplyPrint? Most likely. We expect the Geeetech Mizar Pro to connect to SimplyPrint via OctoPrint, but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone. ### How do I connect the Geeetech Mizar Pro to SimplyPrint? Follow our step-by-step setup guide for the Geeetech Mizar Pro. It shows how to connect it via OctoPrint, what you need for each, and which to pick. ### What slicer should I use for the Geeetech Mizar Pro? Cura, PrusaSlicer and OrcaSlicer all work with the Geeetech Mizar Pro, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device. ### Can I use OrcaSlicer with the Geeetech Mizar Pro? Yes, but OrcaSlicer has no built-in profile for the Geeetech Mizar Pro that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match. ### What filament can the Geeetech Mizar Pro print? Geeetech lists PLA, ABS & ASA and PETG for the Mizar Pro. ### Does the Geeetech Mizar Pro work with OctoPrint or Klipper? The Geeetech Mizar Pro works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top. ### What is the Geeetech Mizar Pro's bed size and build volume? The Geeetech Mizar Pro has a 220 x 220 mm print bed and prints up to 260 mm tall, a build volume of about 220 x 220 x 260 mm. See the full specifications table above for bed type, temperatures and more. ### When did the Geeetech Mizar Pro come out? Geeetech launched the Mizar Pro in 2022. ### Can the Geeetech Mizar Pro eject prints automatically? There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.