# Flying Bear Reborn 3: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By Flying Bear, China
- Launched July 2024
- Canonical page: https://simplyprint.io/compatibility/flying-bear-reborn-3

## Flying Bear Reborn 3 at a glance

The Flying Bear Reborn 3 is a 3D printer by Flying Bear with a 300 x 300 x 350 mm build volume.

- Build volume: 300 x 300 x 350 mm
- Enclosure: Fully enclosed
- Max print speed: 500 mm/s
- Motion system: CoreXY
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Connectivity: Wi-Fi, Ethernet, USB

## Connect the Flying Bear Reborn 3 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| Klipper (Moonraker) | Not confirmed yet - help us find out |  | Flying Bear says "Klipper firmware" with a native Klipper touchscreen UI and Wi-Fi control from PC/phone, which points to Moonraker, but Moonraker/Mainsail/Fluidd is not named anywhere — confirm on a unit. ([Source](https://3dflyingbear.com/products/flying-bear-3d-printer-reborn-3)) |
| OctoPrint (Directly, over USB) | Not compatible |  | Flying Bear says Klipper firmware; OctoPrint only on top of Klipper. ([Source](https://3dflyingbear.com/products/flying-bear-3d-printer-reborn-3)); Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin |

- [Help us confirm](https://simplyprint.io/compatibility/flying-bear-reborn-3/confirm)

## What slicer to use for the Flying Bear Reborn 3

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Flying Bear Reborn 3, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Flying Bear Reborn 3 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Flying Bear Reborn 3 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Flying Bear Reborn 3 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Flying Bear Reborn 3 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Flying Bear Reborn 3 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Flying Bear Reborn 3 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Flying Bear Reborn 3 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Flying Bear Reborn 3.

## Flying Bear Reborn 3 specifications: bed size, print height and more

### Size

- Build volume: 300 x 300 x 350 mm
- Bed type: Square
- Bed size: 300 x 300 mm
- Max print height: 350 mm

### Printing

- Enclosure: Fully enclosed
- Motion system: CoreXY
- Max print speed: 500 mm/s
- Max extruder temperature: 300 °C
- Has heated bed: Yes
- Max bed temperature: 130 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, Ethernet, USB
- Supports serial printing: No
- Shipped firmware: Klipper

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Flying Bear
- Printer model name: Reborn 3
- Made by a company from: China
- Launched: July 2024
- Still made: Yes

[Read more by the manufacturer](https://3dflyingbear.com/products/flying-bear-3d-printer-reborn-3)

## What filament can the Flying Bear Reborn 3 print?

Filament compatibility for the Flying Bear Reborn 3: the materials Flying Bear lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |

## Printers like the Flying Bear Reborn 3 that work with SimplyPrint

- [Creality K1 Max](https://simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Bambu Lab H2S Combo](https://simplyprint.io/compatibility/bambu-lab-h2s-combo): Verified by SimplyPrint, 340 x 320 x 340 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Bambu Lab H2D Combo](https://simplyprint.io/compatibility/bambu-lab-h2d-combo): Verified by SimplyPrint, 325 x 320 x 325 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Creality K2 Plus Combo](https://simplyprint.io/compatibility/creality-k2-plus-combo): Compatible, 350 x 350 x 350 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Where to buy the Flying Bear Reborn 3

- [Flying Bear's global store](https://simplyprint.io/buy/8309) (Official store): $469.00 (Price at Flying Bear, checked October 23, 2026)

## Frequently asked questions

### Is the Flying Bear Reborn 3 compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Flying Bear Reborn 3, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the Flying Bear Reborn 3?

Cura, PrusaSlicer and OrcaSlicer all work with the Flying Bear Reborn 3, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the Flying Bear Reborn 3?

Yes, but OrcaSlicer has no built-in profile for the Flying Bear Reborn 3 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the Flying Bear Reborn 3 print?

Flying Bear lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC) and Carbon-fiber & glass-filled for the Reborn 3.

### What is the Flying Bear Reborn 3's bed size and build volume?

The Flying Bear Reborn 3 has a 300 x 300 mm print bed and prints up to 350 mm tall, a build volume of about 300 x 300 x 350 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Flying Bear Reborn 3 come out?

Flying Bear launched the Reborn 3 in July 2024.

### Where can I buy the Flying Bear Reborn 3?

From Flying Bear's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.