# Flying Bear Ghost 7: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By Flying Bear, China
- Launched March 2026
- Canonical page: https://simplyprint.io/compatibility/flying-bear-ghost-7

## Flying Bear Ghost 7 at a glance

The Ghost 7 is Flying Bear's low-priced printer with an automatic platform swap, five-colour printing, a 300 degrees C hotend and a 600 mm/s top speed. It is for hobbyists who want to try multi-colour and batch printing on a small budget.

- Build volume: 250 x 250 x 205 mm
- Max print speed: 600 mm/s
- Prints well: PLA, PETG
- Connectivity: Wi-Fi

## Connect the Flying Bear Ghost 7 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| Klipper (Moonraker) | Not confirmed yet - help us find out |  | Flying Bear doesn't name the firmware on its page; third-party listings say Klipper/Moonraker, unverified. ([Source](https://3dflyingbear.com/products/flying-bear-ghost7-3d-printer-with-auto-platform-swap-5-color-printing-600mm-s-speed)) |
| OctoPrint (Directly, over USB) | Not confirmed yet - help us find out |  | Firmware not stated by Flying Bear. ([Source](https://3dflyingbear.com/products/flying-bear-ghost7-3d-printer-with-auto-platform-swap-5-color-printing-600mm-s-speed)) |

- [Help us confirm](https://simplyprint.io/compatibility/flying-bear-ghost-7/confirm)

## What slicer to use for the Flying Bear Ghost 7

None of the slicers in SimplyPrint's cloud can slice for the Flying Bear Ghost 7 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Flying Bear Ghost 7 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Flying Bear Ghost 7 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Flying Bear Ghost 7 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Flying Bear Ghost 7 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Flying Bear Ghost 7 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Flying Bear Ghost 7 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Flying Bear Ghost 7 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Flying Bear Ghost 7.

## Flying Bear Ghost 7 specifications: bed size, print height and more

### Size

- Build volume: 250 x 250 x 205 mm
- Bed type: Square
- Bed size: 250 x 250 mm
- Max print height: 205 mm

### Printing

- Max print speed: 600 mm/s
- Max extruder temperature: 300 °C
- Has heated bed: Yes
- Max bed temperature: 100 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Connecting

- Connectivity: Wi-Fi
- Supports serial printing: Unknown
- Shipped firmware: Unknown

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Flying Bear
- Printer model name: Ghost 7
- Made by a company from: China
- Launched: March 2026

[Read more by the manufacturer](https://3dflyingbear.com/products/flying-bear-ghost7-3d-printer-with-auto-platform-swap-5-color-printing-600mm-s-speed)

## What filament can the Flying Bear Ghost 7 print?

Filament compatibility for the Flying Bear Ghost 7: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

## When to choose the Flying Bear Ghost 7

Choose the Ghost 7 if price and the platform-swap idea attract you and you accept a thin evidence base: Flying Bear's store lists it from $329, down from $499, and no customer reviews have been posted there. We found no independent review, no firmware or enclosure details and no confirmed SimplyPrint route. For a printer with reviews and a known multi-colour system, the Elegoo Centauri 2 Combo or Bambu Lab A1 is the safer pick.

### Pros

- An auto-platform swap feature (Flying Bear), which could help batch printing.
- Five-colour printing (Flying Bear).
- A 300 degrees C hotend and a 600 mm/s top speed (Flying Bear).
- Wi-Fi for remote monitoring (Flying Bear), and a low price of $329 on the store (Flying Bear).

### Cons

- No independent review and no customer reviews yet, so reliability is unknown.
- The maker's page gives no enclosure, firmware or material details.
- We have not confirmed how it connects to SimplyPrint; Klipper and OctoPrint are both unknown.
- The speed and colour claims are the maker's own and unverified.

### Who it suits

- Schools: Not a good fit. Unknown enclosure and safety details and no confirmed SimplyPrint support.
- Hobbyists: Can work. Cheap multi-colour and platform-swap printing, but unproven and without reviews.
- Businesses: Not a good fit. No reliability data, no firmware or material details and no confirmed SimplyPrint route.
- Print farms: Not a good fit. The platform swap is interesting, but nothing shows it works unattended and SimplyPrint support is unconfirmed.

## Printers like the Flying Bear Ghost 7 that work with SimplyPrint

- [Flying Bear 4s](https://simplyprint.io/compatibility/flying-bear-4s): Compatible, 275 x 210 x 210 mm, Also by Flying Bear · Similar build volume
- [Bambu Lab P2S Combo](https://simplyprint.io/compatibility/bambu-lab-p2s-combo): Verified by SimplyPrint, 256 x 256 x 256 mm, Similar build volume
- [Snapmaker U1](https://simplyprint.io/compatibility/snapmaker-u1): Compatible, 270 x 270 x 270 mm, Similar build volume
- [Creality K1C](https://simplyprint.io/compatibility/creality-k1c): Compatible, 220 x 220 x 250 mm, Similar build volume

## Where to buy the Flying Bear Ghost 7

- [Flying Bear's global store](https://simplyprint.io/buy/8311) (Official store): $329.00 (Price at Flying Bear, checked October 23, 2026)

## Frequently asked questions

### Is the Flying Bear Ghost 7 compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Flying Bear Ghost 7, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the Flying Bear Ghost 7?

None of the slicers in SimplyPrint's cloud can slice for the Flying Bear Ghost 7 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the Flying Bear Ghost 7 print?

Based on its specs (hotend up to 300C, heated bed up to 100C), the Flying Bear Ghost 7 handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.

### What is the Flying Bear Ghost 7's bed size and build volume?

The Flying Bear Ghost 7 has a 250 x 250 mm print bed and prints up to 205 mm tall, a build volume of about 250 x 250 x 205 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Flying Bear Ghost 7 come out?

Flying Bear launched the Ghost 7 in March 2026.

### Where can I buy the Flying Bear Ghost 7?

From Flying Bear's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.