# Flashforge Adventurer 3 Pro 2: specs, SimplyPrint compatibility and setup > **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone. - By Flashforge, China - Launched June 2023 - Canonical page: https://simplyprint.io/compatibility/flashforge-adventurer-3-pro-2 ## Flashforge Adventurer 3 Pro 2 at a glance The Flashforge Adventurer 3 Pro 2 is a 3D printer by Flashforge with a 150 x 150 x 150 mm build volume. - Build volume: 150 x 150 x 150 mm - Enclosure: Fully enclosed - Max print speed: 300 mm/s - Motion system: Bed slinger - Prints well: PLA, PETG, ABS & ASA, Nylon (PA), Carbon-fiber & glass-filled - Built-in camera: Yes - Connectivity: USB, Wi-Fi, Ethernet ## Connect the Flashforge Adventurer 3 Pro 2 to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint Client | Not confirmed yet - help us find out | | The Client's Flashforge integration is set up with an IP and LAN access code (Adventurer 5M/AD5X/Creator 5 generation); not known whether it reaches this older model. ([Source](https://en.fss.flashforge.com/10000/software/0195d9c78d64913accfdc8a63e88454c.pdf)) | | Klipper (Moonraker) | Not compatible | | Closed FlashForge firmware; Klipper only after replacing it. ([Source](https://en.fss.flashforge.com/10000/software/0195d9c78d64913accfdc8a63e88454c.pdf)); Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification | | OctoPrint (Directly, over USB) | Not compatible | | Manual lists USB stick, Wi-Fi and Ethernet only; the Adventurer 3 family has no USB-to-host port. ([Source](https://en.fss.flashforge.com/10000/software/0195d9c78d64913accfdc8a63e88454c.pdf)); The printer has no USB port a computer can connect to | - [Help us confirm](https://simplyprint.io/compatibility/flashforge-adventurer-3-pro-2/confirm) ## What slicer to use for the Flashforge Adventurer 3 Pro 2 Use Flashforge's own slicer, Flash Studio / Orca-Flashforge or FlashPrint: none of the slicers in SimplyPrint's cloud has a profile for the Flashforge Adventurer 3 Pro 2, and it doesn't take standard G-code that we know of. - [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Flashforge Adventurer 3 Pro 2 · Runs in the SimplyPrint cloud - [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Flashforge Adventurer 3 Pro 2 · Runs in the SimplyPrint cloud - [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Flashforge Adventurer 3 Pro 2 · Runs in the SimplyPrint cloud - [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Flashforge Adventurer 3 Pro 2 · Runs in the SimplyPrint cloud - [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Flashforge Adventurer 3 Pro 2 · Runs in the SimplyPrint cloud - [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Flashforge Adventurer 3 Pro 2 · Runs in the SimplyPrint cloud - [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Flashforge Adventurer 3 Pro 2 · Runs in the SimplyPrint cloud - [Flash Studio / Orca-Flashforge](https://www.flashforge.com/pages/orca-flashforge): Made by Flashforge, not in the SimplyPrint cloud - [FlashPrint](https://www.flashforge.com/pages/download-center): Made by Flashforge, not in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Flashforge Adventurer 3 Pro 2. ## Flashforge Adventurer 3 Pro 2 specifications: bed size, print height and more ### Size - Build volume: 150 x 150 x 150 mm - Bed type: Square - Bed size: 150 x 150 mm - Max print height: 150 mm ### Printing - Enclosure: Fully enclosed - Motion system: Bed slinger - Max print speed: 300 mm/s - Max extruder temperature: 265 °C - Has heated bed: Yes - Max bed temperature: 100 °C - Number of nozzles: 1 - Toolheads: 1 - Direct drive: No - Probing tool / Auto Bed Leveling: Yes - Filament width: 1.75 mm ### Multi-material - Toolchanger or hotend changer: No - IDEX (independent dual extruders): No ### Connecting - Connectivity: USB, Wi-Fi, Ethernet - Built-in camera: Yes - Prints from: USB stick - Supports serial printing: No - Shipped firmware: The maker's own ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) ### The printer - Printer manufacturer / brand: Flashforge - Printer model name: Adventurer 3 Pro 2 - Made by a company from: China - Launched: June 2023 [Read more by the manufacturer](https://www.flashforge.com/blogs/download-center/adventure-series) ## What filament can the Flashforge Adventurer 3 Pro 2 print? Filament compatibility for the Flashforge Adventurer 3 Pro 2: the materials Flashforge lists for it. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | On the maker's list of materials for this printer. | | PETG | Great | On the maker's list of materials for this printer. | | TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. | | ABS & ASA | Great | On the maker's list of materials for this printer. | | Nylon (PA) | Good | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. | | Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. | | Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. | ## Printers like the Flashforge Adventurer 3 Pro 2 that work with SimplyPrint - [Flashforge Adventurer 5M Pro](https://simplyprint.io/compatibility/flashforge-adventurer-5m-pro): Compatible, 220 x 220 x 220 mm, Also by Flashforge · Also prints ABS & ASA, Nylon (PA) - [Flashforge Creator 5 Pro](https://simplyprint.io/compatibility/flashforge-creator-5-pro): Compatible, 256 x 256 x 256 mm, Also by Flashforge · Also prints ABS & ASA, Nylon (PA), Carbon-fiber & glass-filled - [Sovol Zero](https://simplyprint.io/compatibility/sovol-zero): Compatible, 152 x 152 x 152 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA) - [PrintersForAnts Salad Fork](https://simplyprint.io/compatibility/printersforants-salad-fork): Compatible, 180 x 180 x 150 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA) ## About Flashforge Flashforge (Zhejiang Flashforge 3D Technology) is a Chinese 3D printer maker founded in 2011. It sells the Adventurer 5M and 5M Pro CoreXY printers, the AD5X multi-colour printer and the Creator series, plus resin and wax printers, to customers ranging from hobbyists to businesses. - Founded: 2011 - Headquarters: Zhejiang, China - Ownership: Zhejiang Flashforge 3D Technology Co., Ltd. - Website: https://www.flashforge.com Openness: Mixed (3.0 of 5) Flashforge is mixed: the Adventurer 5M runs Klipper with published source and works in a LAN mode with open slicers, but the stock system is closed to modification and its app relies on the cloud. - Firmware and custom firmware (3 of 5): The Adventurer 5M series runs Klipper, and Flashforge published its Klipper source on GitHub under GPL-3.0 in January 2024. The stock system is not built to be modified: the community 'Klipper Mod', which adds Moonraker, Mainsail and Fluidd, is unofficial and warns that it may cost the warranty. - Local control and integrations (3 of 5): A LAN mode lets Orca-Flashforge send jobs on the local network, and USB printing works offline. The Flash Maker app needs internet and a Flashforge account and does not connect in LAN mode. Flashforge documents no local API for other software. Moonraker with Mainsail or Fluidd comes only with the community Klipper Mod, which is unofficial and warns that it may cost the warranty. - Third-party filament, slicers and parts (3 of 5): Third-party filament works; Orca-Flashforge is an open-source OrcaSlicer fork and OrcaSlicer itself supports Flashforge printers. Nozzles are sold as complete printer-specific assemblies. - Repairs and spare parts (3 of 5): Flashforge sells nozzle, extruder, filament-feeding and touchscreen assemblies for the Adventurer 5M, and its wiki has replacement guides, for example the AD5X extruder board. - Community and documentation (3 of 5): A wiki with manuals, FAQs and maintenance guides, and slicer and Klipper sources on GitHub; much of the advanced use comes from the community mod. ### Pros - Long-established maker, founded in 2011. - LAN mode and USB printing work without the cloud. - Klipper source and an open-source slicer are published. - Common replacement assemblies are sold for the Adventurer 5M. ### Cons - Stock firmware is not meant to be modified; deeper control needs an unofficial community mod. - The Flash Maker app needs internet and an account, and does not work in LAN mode. - Nozzles are sold as complete printer-specific assemblies. ### Track record - January 2024: Flashforge published the Klipper source for the Adventurer 5M and 5M Pro on GitHub under GPL-3.0. How Flashforge compares with every other brand: https://simplyprint.io/articles/best-3d-printer ## Frequently asked questions ### Is the Flashforge Adventurer 3 Pro 2 compatible with SimplyPrint? We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Flashforge Adventurer 3 Pro 2, our compatibility check tells you in a few questions how it could connect. ### What slicer should I use for the Flashforge Adventurer 3 Pro 2? Use Flashforge's own slicer, Flash Studio / Orca-Flashforge or FlashPrint: none of the slicers in SimplyPrint's cloud has a profile for the Flashforge Adventurer 3 Pro 2, and it doesn't take standard G-code that we know of. ### What filament can the Flashforge Adventurer 3 Pro 2 print? Flashforge lists PLA, PETG, ABS & ASA and Carbon-fiber & glass-filled for the Adventurer 3 Pro 2. ### What is the Flashforge Adventurer 3 Pro 2's bed size and build volume? The Flashforge Adventurer 3 Pro 2 has a 150 x 150 mm print bed and prints up to 150 mm tall, a build volume of about 150 x 150 x 150 mm. See the full specifications table above for bed type, temperatures and more. ### When did the Flashforge Adventurer 3 Pro 2 come out? Flashforge launched the Adventurer 3 Pro 2 in June 2023. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.