# CreatBot PEEK-300: specs, SimplyPrint compatibility and setup

> **Expected to work** (Most likely). Not confirmed yet, but we expect it to work like the CreatBot F430.

- By CreatBot, China
- Canonical page: https://simplyprint.io/compatibility/creatbot-peek-300

## CreatBot PEEK-300 at a glance

The CreatBot PEEK-300 is a 3D printer by CreatBot with a 300 x 300 x 400 mm build volume.

- Build volume: 300 x 300 x 400 mm
- Enclosure: Fully enclosed
- Max print speed: 180 mm/s
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- Connectivity: USB

## Connect the CreatBot PEEK-300 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Expected to work |  | Through OctoPrint |
| OctoPrint (Directly, over USB) | Expected to work | A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable | Prints over USB like the F430/D600Pro generation (4.3" screen, "USB Connectivity"); CreatBot Util plugin needed for its chamber/serial-print commands. Firmware not confirmed. ([Source](https://plugins.octoprint.org/plugins/CreatbotUtil/)); Expected to work like the CreatBot F430; Requires the OctoPrint plugin  |
| Klipper (Moonraker) | Not confirmed yet - help us find out |  | Firmware not stated by CreatBot. ([Source](https://www.creatbot.com/en/peek-300)) |

- [How to set up SimplyPrint on CreatBot PEEK-300](https://simplyprint.io/setup-guide/creatbot/peek-300.md)
- [How to set up OctoPrint on CreatBot PEEK-300](https://simplyprint.io/compatibility/creatbot-peek-300/octoprint-setup)

- [Help us confirm](https://simplyprint.io/compatibility/creatbot-peek-300/confirm)

### What works with SimplyPrint

Connected through OctoPrint, SimplyPrint is expected to support everything the CreatBot PEEK-300 lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

## What slicer to use for the CreatBot PEEK-300

None of the slicers in SimplyPrint's cloud has a ready-made profile for the CreatBot PEEK-300, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the CreatBot PEEK-300 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the CreatBot PEEK-300 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the CreatBot PEEK-300 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the CreatBot PEEK-300 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the CreatBot PEEK-300 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the CreatBot PEEK-300 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the CreatBot PEEK-300 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the CreatBot PEEK-300.

## The app for the CreatBot PEEK-300

SimplyPrint works as the CreatBot PEEK-300's app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the CreatBot PEEK-300 to SimplyPrint, free](https://simplyprint.io/setup-guide/creatbot/peek-300) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the CreatBot PEEK-300

### Ways to automate it

- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## CreatBot PEEK-300 specifications: bed size, print height and more

### Size

- Build volume: 300 x 300 x 400 mm
- Bed type: Square
- Bed size: 300 x 300 mm
- Max print height: 400 mm

### Printing

- Enclosure: Fully enclosed
- Max print speed: 180 mm/s
- Max extruder temperature: 480 °C
- Has heated bed: Yes
- Max bed temperature: 200 °C
- Heated chamber: Up to 120 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: USB
- Prints from: USB stick
- Supports serial printing: Unknown
- Shipped firmware: Unknown

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: CreatBot
- Printer model name: PEEK-300
- Made by a company from: China
- Still made: Yes

[Read more by the manufacturer](https://www.creatbot.com/en/peek-300)

## What filament can the CreatBot PEEK-300 print?

Filament compatibility for the CreatBot PEEK-300: the materials CreatBot lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
| High-temperature (PEI, PEEK, PEKK) | Great | On the maker's list of materials for this printer. |

### Best filament for the CreatBot PEEK-300

Filaments the CreatBot PEEK-300 prints well, CreatBot's own first, then the best known.

- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [ELEGOO PLA](https://simplyprint.io/filaments/elegoo/pla): PLA, 190-220 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 200-240 °C
- [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C
- [Bambu Lab ABS](https://simplyprint.io/filaments/bambu-lab/abs): ABS, 240-270 °C

## Compare the CreatBot PEEK-300 with similar printers

- [Creality K1 Max](https://simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Bambu Lab H2S Combo](https://simplyprint.io/compatibility/bambu-lab-h2s-combo): Verified by SimplyPrint, 340 x 320 x 340 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- [Bambu Lab H2D Combo](https://simplyprint.io/compatibility/bambu-lab-h2d-combo): Verified by SimplyPrint, 325 x 320 x 325 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- [Creality K2 Plus Combo](https://simplyprint.io/compatibility/creality-k2-plus-combo): Compatible, 350 x 350 x 350 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Compare the CreatBot PEEK-300 with other printers](https://simplyprint.io/compatibility/compare?compare=creatbot-peek-300#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the CreatBot PEEK-300 compatible with SimplyPrint?

Most likely. We expect the CreatBot PEEK-300 to connect to SimplyPrint via OctoPrint, but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.

### How do I connect the CreatBot PEEK-300 to SimplyPrint?

Follow our step-by-step setup guide for the CreatBot PEEK-300. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

### What slicer should I use for the CreatBot PEEK-300?

Cura, PrusaSlicer and OrcaSlicer all work with the CreatBot PEEK-300, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the CreatBot PEEK-300?

Yes, but OrcaSlicer has no built-in profile for the CreatBot PEEK-300 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the CreatBot PEEK-300 print?

CreatBot lists PLA, PETG, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the PEEK-300.

### Does the CreatBot PEEK-300 work with OctoPrint or Klipper?

The CreatBot PEEK-300 works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the CreatBot PEEK-300's bed size and build volume?

The CreatBot PEEK-300 has a 300 x 300 mm print bed and prints up to 400 mm tall, a build volume of about 300 x 300 x 400 mm. See the full specifications table above for bed type, temperatures and more.

### Can the CreatBot PEEK-300 eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.