# CreatBot PEEK-250: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By CreatBot, China
- Canonical page: https://simplyprint.io/compatibility/creatbot-peek-250

## CreatBot PEEK-250 at a glance

The CreatBot PEEK-250 is a 3D printer by CreatBot with a 250 x 250 x 280 mm build volume.

- Build volume: 250 x 250 x 280 mm
- Enclosure: Fully enclosed
- Max print speed: 180 mm/s
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- Connectivity: USB

## Connect the CreatBot PEEK-250 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| Klipper (Moonraker) | Not confirmed yet - help us find out |  | Firmware not stated by CreatBot. ([Source](https://www.creatbot.com/en/peek-250)) |
| OctoPrint (Directly, over USB) | Not confirmed yet - help us find out |  | Spec table lists "USB Connectivity/USB Disk" printing, but the firmware is not stated and nobody reports OctoPrint on it. ([Source](https://www.creatbot.com/en/peek-250)) |

- [Help us confirm](https://simplyprint.io/compatibility/creatbot-peek-250/confirm)

## What slicer to use for the CreatBot PEEK-250

None of the slicers in SimplyPrint's cloud can slice for the CreatBot PEEK-250 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the CreatBot PEEK-250 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the CreatBot PEEK-250 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the CreatBot PEEK-250 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the CreatBot PEEK-250 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the CreatBot PEEK-250 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the CreatBot PEEK-250 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the CreatBot PEEK-250 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the CreatBot PEEK-250.

## CreatBot PEEK-250 specifications: bed size, print height and more

### Size

- Build volume: 250 x 250 x 280 mm
- Bed type: Square
- Bed size: 250 x 250 mm
- Max print height: 280 mm

### Printing

- Enclosure: Fully enclosed
- Max print speed: 180 mm/s
- Max extruder temperature: 480 °C
- Has heated bed: Yes
- Max bed temperature: 200 °C
- Heated chamber: Up to 200 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: No
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: USB
- Prints from: USB stick
- Supports serial printing: Unknown
- Shipped firmware: Unknown

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: CreatBot
- Printer model name: PEEK-250
- Made by a company from: China
- Still made: Yes

[Read more by the manufacturer](https://www.creatbot.com/en/peek-250)

## What filament can the CreatBot PEEK-250 print?

Filament compatibility for the CreatBot PEEK-250: the materials CreatBot lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
| High-temperature (PEI, PEEK, PEKK) | Great | On the maker's list of materials for this printer. |

## Printers like the CreatBot PEEK-250 that work with SimplyPrint

- [Bambu Lab P1S](https://simplyprint.io/compatibility/bambu-lab-p1s): Verified by SimplyPrint, 256 x 256 x 256 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Bambu Lab P2S Combo](https://simplyprint.io/compatibility/bambu-lab-p2s-combo): Verified by SimplyPrint, 256 x 256 x 256 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Creality K1 Max](https://simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Creality K1C](https://simplyprint.io/compatibility/creality-k1c): Compatible, 220 x 220 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Frequently asked questions

### Is the CreatBot PEEK-250 compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a CreatBot PEEK-250, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the CreatBot PEEK-250?

None of the slicers in SimplyPrint's cloud can slice for the CreatBot PEEK-250 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the CreatBot PEEK-250 print?

CreatBot lists PLA, PETG, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the PEEK-250.

### What is the CreatBot PEEK-250's bed size and build volume?

The CreatBot PEEK-250 has a 250 x 250 mm print bed and prints up to 280 mm tall, a build volume of about 250 x 250 x 280 mm. See the full specifications table above for bed type, temperatures and more.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.