# CreatBot D800 Ultra: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By CreatBot, China
- Canonical page: https://simplyprint.io/compatibility/creatbot-d800-ultra

## CreatBot D800 Ultra at a glance

The CreatBot D800 Ultra is a 3D printer by CreatBot with a 800 x 650 x 650 mm build volume.

- Build volume: 800 x 650 x 650 mm
- Enclosure: Fully enclosed
- Max print speed: 1100 mm/s
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Built-in camera: Yes
- Connectivity: USB, Wi-Fi, Ethernet

## Connect the CreatBot D800 Ultra to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| Klipper (Moonraker) | Not confirmed yet - help us find out |  | CreatBot says it runs its own "deeply optimised" Klipper; whether Moonraker/Mainsail/Fluidd is exposed is not documented. ([Source](https://www.creatbot.com/en/d800-ultra)) |
| OctoPrint (Directly, over USB) | Not compatible |  | CreatBot lists Klipper firmware; OctoPrint only on top of Klipper. ([Source](https://www.creatbot.com/en/d800-ultra)); Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin |

- [Help us confirm](https://simplyprint.io/compatibility/creatbot-d800-ultra/confirm)

## What slicer to use for the CreatBot D800 Ultra

None of the slicers in SimplyPrint's cloud has a ready-made profile for the CreatBot D800 Ultra, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the CreatBot D800 Ultra · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the CreatBot D800 Ultra · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the CreatBot D800 Ultra · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the CreatBot D800 Ultra · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the CreatBot D800 Ultra · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the CreatBot D800 Ultra · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the CreatBot D800 Ultra · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the CreatBot D800 Ultra.

## CreatBot D800 Ultra specifications: bed size, print height and more

### Size

- Build volume: 800 x 650 x 650 mm
- Bed type: Rectangle
- Bed size: 800 x 650 mm
- Max print height: 650 mm

### Printing

- Enclosure: Fully enclosed
- Max print speed: 1100 mm/s
- Max extruder temperature: 420 °C
- Has heated bed: Yes
- Max bed temperature: 120 °C
- Heated chamber: Up to 80 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): Yes

### Connecting

- Connectivity: USB, Wi-Fi, Ethernet
- Built-in camera: Yes
- Prints from: USB stick
- Supports serial printing: No
- Shipped firmware: Klipper

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: CreatBot
- Printer model name: D800 Ultra
- Made by a company from: China
- Still made: Yes

[Read more by the manufacturer](https://www.creatbot.com/en/d800-ultra)

## What filament can the CreatBot D800 Ultra print?

Filament compatibility for the CreatBot D800 Ultra: the materials CreatBot lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |

## Printers like the CreatBot D800 Ultra that work with SimplyPrint

- [CreatBot PEEK-300](https://simplyprint.io/compatibility/creatbot-peek-300): Expected to work, 300 x 300 x 400 mm, Also by CreatBot · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [MINGDA Raptor 800](https://simplyprint.io/compatibility/mingda-raptor-800): Expected to work, 800 x 800 x 800 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Tronxy VEHO 800A](https://simplyprint.io/compatibility/tronxy-veho-800a): Compatible, 800 x 800 x 800 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [CreatBot D600Pro](https://simplyprint.io/compatibility/creatbot-d600pro): Expected to work, 600 x 600 x 600 mm, Also by CreatBot · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Frequently asked questions

### Is the CreatBot D800 Ultra compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a CreatBot D800 Ultra, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the CreatBot D800 Ultra?

Cura, PrusaSlicer and OrcaSlicer all work with the CreatBot D800 Ultra, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the CreatBot D800 Ultra?

Yes, but OrcaSlicer has no built-in profile for the CreatBot D800 Ultra that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the CreatBot D800 Ultra print?

CreatBot lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC) and Carbon-fiber & glass-filled for the D800 Ultra.

### What is the CreatBot D800 Ultra's bed size and build volume?

The CreatBot D800 Ultra has a 800 x 650 mm print bed and prints up to 650 mm tall, a build volume of about 800 x 650 x 650 mm. See the full specifications table above for bed type, temperatures and more.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.