# CreatBot D1200 Ultra: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By CreatBot, China
- Canonical page: https://simplyprint.io/compatibility/creatbot-d1200-ultra

## CreatBot D1200 Ultra at a glance

The CreatBot D1200 Ultra is a 3D printer by CreatBot with a 1200 x 1050 x 1050 mm build volume.

- Build volume: 1200 x 1050 x 1050 mm
- Enclosure: Fully enclosed
- Max print speed: 1100 mm/s
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Built-in camera: Yes
- Connectivity: USB, Wi-Fi, Ethernet

## Connect the CreatBot D1200 Ultra to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| Klipper (Moonraker) | Not confirmed yet - help us find out |  | CreatBot says it runs its own "deeply optimised" Klipper; whether Moonraker/Mainsail/Fluidd is exposed is not documented. ([Source](https://www.creatbot.com/en/d1200-ultra)) |
| OctoPrint (Directly, over USB) | Not compatible |  | CreatBot lists Klipper firmware; OctoPrint only on top of Klipper. ([Source](https://www.creatbot.com/en/d1200-ultra)); Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin |

- [Help us confirm](https://simplyprint.io/compatibility/creatbot-d1200-ultra/confirm)

## What slicer to use for the CreatBot D1200 Ultra

None of the slicers in SimplyPrint's cloud has a ready-made profile for the CreatBot D1200 Ultra, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the CreatBot D1200 Ultra · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the CreatBot D1200 Ultra · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the CreatBot D1200 Ultra · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the CreatBot D1200 Ultra · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the CreatBot D1200 Ultra · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the CreatBot D1200 Ultra · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the CreatBot D1200 Ultra · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the CreatBot D1200 Ultra.

## CreatBot D1200 Ultra specifications: bed size, print height and more

### Size

- Build volume: 1200 x 1050 x 1050 mm
- Bed type: Rectangle
- Bed size: 1200 x 1050 mm
- Max print height: 1050 mm

### Printing

- Enclosure: Fully enclosed
- Max print speed: 1100 mm/s
- Max extruder temperature: 420 °C
- Has heated bed: Yes
- Max bed temperature: 120 °C
- Heated chamber: Up to 80 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): Yes

### Connecting

- Connectivity: USB, Wi-Fi, Ethernet
- Built-in camera: Yes
- Prints from: USB stick
- Supports serial printing: No
- Shipped firmware: Klipper

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: CreatBot
- Printer model name: D1200 Ultra
- Made by a company from: China
- Still made: Yes

[Read more by the manufacturer](https://www.creatbot.com/en/d1200-ultra)

## What filament can the CreatBot D1200 Ultra print?

Filament compatibility for the CreatBot D1200 Ultra: the materials CreatBot lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |

## Printers like the CreatBot D1200 Ultra that work with SimplyPrint

- [WASP 3MT HDP](https://simplyprint.io/compatibility/wasp-3mt-hdp): Compatible, 1000 x 1000 x 1000 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [CreatBot PEEK-300](https://simplyprint.io/compatibility/creatbot-peek-300): Expected to work, 300 x 300 x 400 mm, Also by CreatBot · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [MINGDA MD-1000D](https://simplyprint.io/compatibility/mingda-md-1000d): Compatible, 1000 x 1000 x 1000 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [MINGDA MD-1000 Pro+](https://simplyprint.io/compatibility/mingda-md-1000-pro-plus): Expected to work, 1000 x 1000 x 1000 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled

## Frequently asked questions

### Is the CreatBot D1200 Ultra compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a CreatBot D1200 Ultra, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the CreatBot D1200 Ultra?

Cura, PrusaSlicer and OrcaSlicer all work with the CreatBot D1200 Ultra, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the CreatBot D1200 Ultra?

Yes, but OrcaSlicer has no built-in profile for the CreatBot D1200 Ultra that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the CreatBot D1200 Ultra print?

CreatBot lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC) and Carbon-fiber & glass-filled for the D1200 Ultra.

### What is the CreatBot D1200 Ultra's bed size and build volume?

The CreatBot D1200 Ultra has a 1200 x 1050 mm print bed and prints up to 1050 mm tall, a build volume of about 1200 x 1050 x 1050 mm. See the full specifications table above for bed type, temperatures and more.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.