# Creality Sermoon D3: specs, SimplyPrint compatibility and setup > **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone. - By Creality, China - Launched 2022 - Canonical page: https://simplyprint.io/compatibility/creality-sermoon-d3 ## Creality Sermoon D3 at a glance The Creality Sermoon D3 is a 3D printer by Creality with a 300 x 250 x 300 mm build volume. - Build volume: 300 x 250 x 300 mm - Enclosure: Fully enclosed - Max print speed: 250 mm/s - Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled - Built-in camera: Yes - Connectivity: Wi-Fi, Ethernet, USB ## Connect the Creality Sermoon D3 to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint Client | Not confirmed yet - help us find out | | Networked via Creality Cloud/Creality Print LAN, not Creality OS; whether the Creality integration reaches it is unknown. ([Source](https://www.creality.com/products/sermoon-d3-3d-printer)) | | OctoPrint (Directly, over USB) | Not confirmed yet - help us find out | | Marlin firmware, but Creality only lists Wi-Fi/Ethernet (Creality Print/Cloud) printing; no evidence of USB serial printing. ([Source](https://www.creality.com/products/sermoon-d3-3d-printer)) | | Klipper (Moonraker) | Not compatible | | Ships Marlin (per Creality's firmware download); runs Klipper only after you install it. ([Source](https://www.creality.com/pages/download-sermoon-d3)); Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification | - [Help us confirm](https://simplyprint.io/compatibility/creality-sermoon-d3/confirm) ## What slicer to use for the Creality Sermoon D3 Creality printers use CrealityPrint, Creality's own slicer. There's no ready-made profile for the Creality Sermoon D3 in our cloud yet. - [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No ready-made profile for the Creality Sermoon D3 yet · Creality's own slicer · Runs in the SimplyPrint cloud - [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Creality Sermoon D3 · Runs in the SimplyPrint cloud - [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Creality Sermoon D3 · Runs in the SimplyPrint cloud - [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Creality Sermoon D3 · Runs in the SimplyPrint cloud - [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Creality Sermoon D3 · Runs in the SimplyPrint cloud - [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Creality Sermoon D3 · Runs in the SimplyPrint cloud - [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Creality Sermoon D3 · Runs in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Creality Sermoon D3. ## Creality Sermoon D3 specifications: bed size, print height and more ### Size - Build volume: 300 x 250 x 300 mm - Bed type: Rectangle - Bed size: 300 x 250 mm - Max print height: 300 mm ### Printing - Enclosure: Fully enclosed - Max print speed: 250 mm/s - Max extruder temperature: 300 °C - Has heated bed: Yes - Max bed temperature: 110 °C - Number of nozzles: 1 - Toolheads: 1 - Direct drive: Yes - Probing tool / Auto Bed Leveling: Yes - Filament width: 1.75 mm ### Multi-material - Toolchanger or hotend changer: No - IDEX (independent dual extruders): No ### Connecting - Connectivity: Wi-Fi, Ethernet, USB - Built-in camera: Yes - Prints from: USB stick - Supports serial printing: Unknown - Shipped firmware: Marlin ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) ### The printer - Printer manufacturer / brand: Creality - Printer model name: Sermoon D3 - Made by a company from: China - Launched: 2022 - Still made: Yes [Read more by the manufacturer](https://www.creality.com/products/sermoon-d3-3d-printer) ## What filament can the Creality Sermoon D3 print? Filament compatibility for the Creality Sermoon D3: the materials Creality lists for it. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | On the maker's list of materials for this printer. | | PETG | Great | On the maker's list of materials for this printer. | | TPU & flexibles | Great | On the maker's list of materials for this printer. | | ABS & ASA | Great | On the maker's list of materials for this printer. | | Nylon (PA) | Great | On the maker's list of materials for this printer. | | Polycarbonate (PC) | Great | On the maker's list of materials for this printer. | | Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. | ## Printers like the Creality Sermoon D3 that work with SimplyPrint - [Creality K1 Max](https://simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Also by Creality · Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [Creality CR-5 Pro H](https://simplyprint.io/compatibility/creality-cr-5-pro-h): Compatible, 300 x 225 x 380 mm, Also by Creality · Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [Bambu Lab P1S](https://simplyprint.io/compatibility/bambu-lab-p1s): Verified by SimplyPrint, 256 x 256 x 256 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [Voron Voron Trident](https://simplyprint.io/compatibility/voron-voron-trident): Compatible, 350 x 350 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) ## About Creality Creality is a Shenzhen 3D printer maker founded in 2014. Its low-cost Ender series, launched in 2017, made desktop 3D printing affordable for many hobbyists. It now sells Klipper-based K-series CoreXY printers, Ender and CR open-frame printers, the Hi and SPARKX beginner lines, the CFS multi-material system, 3D scanners and laser engravers, and runs the Creality Cloud model platform. It listed on the Hong Kong Stock Exchange in 2026. - Founded: 2014 - Headquarters: Shenzhen, China - Ownership: Listed on the Hong Kong Stock Exchange (3388.HK) since 2026; founder Jack Chen is chief executive - Website: https://www.creality.com Openness: Mostly open (3.6 of 5) Creality sits in the middle: its Klipper-based printers can be run locally with Fluidd and open slicers, and it publishes firmware source, but usually months after launch, and it dropped root access on its 2025 K1 revisions. - Firmware and custom firmware (3 of 5): Creality publishes Klipper firmware source for the K1, K2, Hi and Ender-3 V3 KE on GitHub under GPL, but after launch: the K1 source came about three months after the series launched in May 2023, the K2 and Hi sources in September 2025. Earlier K1 printers have an official root option with a published guide, but Creality's wiki says the 2025 K1C and K1 Max do not support root access. - Local control and integrations (4 of 5): Creality Print sends jobs over the local network with no account, and Creality Cloud is optional. The K2 series and Ender-3 V3 serve Fluidd on the printer, so other software can use Klipper's documented Moonraker API. On the K1 series, Creality's firmware notes treat Fluidd and Mainsail as add-ons owners install themselves, and Creality says the 2025 K1C and K1 Max do not support root access. The SPARKX i7 is set up through the Creality Cloud app. - Third-party filament, slicers and parts (4 of 5): Third-party filament works; Creality Print is an open-source (AGPL-3.0) slicer and OrcaSlicer supports Creality printers. Creality sells nozzle, hotend and extruder kits per model; newer K2 parts such as its nozzle kit are Creality designs. - Repairs and spare parts (4 of 5): Creality's store sells extruder, hotend, heating-block and print-head kits per model, and its wiki has parts lists and replacement guides for current printers (for example the K2 Plus and SPARKX i7 hotends). - Data and privacy (3 of 5): Local printing needs no account; Creality Cloud and its app need one. Creality's published privacy policy is written for its websites and services, allows use of data for targeted advertising, and says little about printer data or where it is stored. - Community and documentation (4 of 5): One of the largest user bases (second in consumer 3D printers by 2025 sales value, per figures in its listing), a public wiki with model-specific guides, firmware and slicer sources on GitHub, and an official forum. ### Pros - Klipper-based models can be run entirely on the local network through Fluidd, without an account. - Firmware for most current models and the Creality Print slicer are published as source on GitHub. - Wide range, from budget Ender printers to multi-colour K2 machines. - Spare-part kits and model-specific replacement guides are easy to find. - Very large user base, so community help is easy to find. ### Cons - Firmware source has usually appeared months after a model ships. - Root access, offered on earlier K1 printers, is not supported on the 2025 K1C and K1 Max. - The privacy policy says little about printer and cloud data. - The SPARKX line is built around the Creality Cloud app and an account. ### Track record - May 2026: Creality listed on the Main Board of the Hong Kong Stock Exchange (3388.HK), raising about HK$1.27 billion net. Its prospectus showed 2025 revenue of RMB 3.13 billion and a net loss of RMB 182.4 million, after a profit in 2024. - November 2025: Creality's wiki states that the 2025 revisions of the K1C and K1 Max do not support root access, which earlier K1 printers offered through an official option and guide. - September 2025: Creality published the Klipper source for its K2 series and for the Hi on GitHub under GPL-3.0. - August 2023: About three months after the K1 series launched, Creality published its K1 Klipper source on GitHub, followed by a repository with a root guide and Fluidd and Mainsail install instructions. How Creality compares with every other brand: https://simplyprint.io/articles/best-3d-printer ## Frequently asked questions ### Is the Creality Sermoon D3 compatible with SimplyPrint? We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Creality Sermoon D3, our compatibility check tells you in a few questions how it could connect. ### What slicer should I use for the Creality Sermoon D3? Use CrealityPrint, Creality's own slicer, made for its printers. You can run it in SimplyPrint's online slicer; there's no ready-made profile for the Creality Sermoon D3 in it yet. ### Can I use OrcaSlicer with the Creality Sermoon D3? Yes, but OrcaSlicer has no built-in profile for the Creality Sermoon D3 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match. ### What filament can the Creality Sermoon D3 print? Creality lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC) and Carbon-fiber & glass-filled for the Sermoon D3. ### What is the Creality Sermoon D3's bed size and build volume? The Creality Sermoon D3 has a 300 x 250 mm print bed and prints up to 300 mm tall, a build volume of about 300 x 250 x 300 mm. See the full specifications table above for bed type, temperatures and more. ### When did the Creality Sermoon D3 come out? Creality launched the Sermoon D3 in 2022. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.