# Creality Ender-3 V3 Neo Combo: specs, SimplyPrint compatibility and setup > **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone. - By Creality, China - Launched October 2026 - Canonical page: https://simplyprint.io/compatibility/creality-ender-3-v3-neo-combo ## Creality Ender-3 V3 Neo Combo at a glance The Ender-3 V3 Neo is Creality's compact beginner printer: a 220 mm build volume with CR Touch auto-levelling, an extruder that handles PLA, PETG and TPU, and a Combo with the CFS nano for four colours. It is for first-time buyers who want a small, cheap printer. - Build volume: 220 x 220 x 220 mm - Ships with multi-material: Creality CFS Nano - Enclosure: Open frame - Max print speed: 500 mm/s - Motion system: Bed slinger - Prints well: PLA, PETG, TPU & flexibles, ABS & ASA - Built-in camera: Yes - Connectivity: Wi-Fi, USB ## Connect the Creality Ender-3 V3 Neo Combo to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint Client | Not confirmed yet - help us find out | | Wi-Fi and Creality Cloud, but which OS/protocol it runs is not stated, so the Creality integration is unconfirmed. ([Source](https://www.creality.com/products/ender-3-v3-neo)) | | Klipper (Moonraker) | Not confirmed yet - help us find out | | Creality doesn't name the firmware and there is no Creality Print profile for it yet; Klipper/Moonraker unconfirmed. ([Source](https://www.creality.com/products/ender-3-v3-neo)) | | OctoPrint (Directly, over USB) | Not confirmed yet - help us find out | | Firmware and whether its USB port takes a computer are not stated; only USB-drive printing is listed. ([Source](https://www.creality.com/products/ender-3-v3-neo)) | - [Help us confirm](https://simplyprint.io/compatibility/creality-ender-3-v3-neo-combo/confirm) ## What slicer to use for the Creality Ender-3 V3 Neo Combo Creality printers use CrealityPrint, Creality's own slicer. There's no ready-made profile for the Creality Ender-3 V3 Neo Combo in our cloud yet. - [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No ready-made profile for the Creality Ender-3 V3 Neo Combo yet · Creality's own slicer · Runs in the SimplyPrint cloud - [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Creality Ender-3 V3 Neo Combo · Runs in the SimplyPrint cloud - [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Creality Ender-3 V3 Neo Combo · Runs in the SimplyPrint cloud - [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Creality Ender-3 V3 Neo Combo · Runs in the SimplyPrint cloud - [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Creality Ender-3 V3 Neo Combo · Runs in the SimplyPrint cloud - [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Creality Ender-3 V3 Neo Combo · Runs in the SimplyPrint cloud - [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Creality Ender-3 V3 Neo Combo · Runs in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Creality Ender-3 V3 Neo Combo. ## Creality Ender-3 V3 Neo Combo specifications: bed size, print height and more ### Size - Build volume: 220 x 220 x 220 mm - Bed type: Square - Bed size: 220 x 220 mm - Max print height: 220 mm ### Printing - Enclosure: Open frame - Motion system: Bed slinger - Max print speed: 500 mm/s - Max extruder temperature: 300 °C - Has heated bed: Yes - Max bed temperature: 100 °C - Number of nozzles: 1 - Toolheads: 1 - Direct drive: No - Probing tool / Auto Bed Leveling: Yes - Filament width: 1.75 mm ### Multi-material - Ships with multi-material: Creality CFS Nano - Multi-material units it works with: Creality CFS Nano - Toolchanger or hotend changer: No - IDEX (independent dual extruders): No ### Connecting - Connectivity: Wi-Fi, USB - Built-in camera: Yes - Prints from: USB stick - Supports serial printing: Unknown - Shipped firmware: Unknown ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) ### The printer - Printer manufacturer / brand: Creality - Printer model name: Ender-3 V3 Neo Combo - Made by a company from: China - Launched: October 2026 - Still made: Yes [Read more by the manufacturer](https://www.creality.com/products/ender-3-v3-neo) ## What filament can the Creality Ender-3 V3 Neo Combo print? Filament compatibility for the Creality Ender-3 V3 Neo Combo: the materials Creality lists for it. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | On the maker's list of materials for this printer. | | PETG | Great | On the maker's list of materials for this printer. | | TPU & flexibles | Great | On the maker's list of materials for this printer. | | ABS & ASA | Great | On the maker's list of materials for this printer. | | Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. | | Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. | | Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. | ## When to choose the Creality Ender-3 V3 Neo Combo Choose the Neo for a first printer, a desk or a student project: Creality's store lists it at $239, or $329 as the Combo with the CFS nano. It is new and we found no independent review, and our facts do not confirm a SimplyPrint route yet. For a larger plate choose the Ender-3 V3 Mega; for ABS, ASA or a closed chamber, look at an enclosed printer such as the Creality K2 or Bambu Lab P2S. ### Pros - A compact 220 mm build volume for everyday projects and educational models (Creality). - CR Touch multi-point auto-levelling for a good first layer without manual levelling (Creality). - An extruder for PLA, PETG and flexible TPU (Creality). - The Combo adds the CFS nano for four-colour printing, at $329 on Creality's store (Creality). - Low price: $239 for the standalone printer (Creality store). ### Cons - Open frame with no enclosure, so it is best kept to PLA, PETG and TPU. - A small build volume, 220 mm. - We have not confirmed how it connects to SimplyPrint; Klipper, OctoPrint and the SimplyPrint Client are all unknown. - New, and no independent review found. ### Who it suits - Schools: Can work. Small, cheap and easy to start, but open and without confirmed SimplyPrint support, so approval queueing is not assured. - Hobbyists: Good fit. A low-cost first printer with auto-levelling, plus an optional four-colour Combo. - Businesses: Not a good fit. A small, open, entry-level machine with unconfirmed SimplyPrint support. - Print farms: Not a good fit. Small plate, no enclosure and no confirmed SimplyPrint route make it a weak fleet choice. ## Printers like the Creality Ender-3 V3 Neo Combo that work with SimplyPrint - [Creality Ender-3 V4](https://simplyprint.io/compatibility/creality-ender-3-v4): Compatible, 220 x 220 x 235 mm, Also by Creality · Similar build volume · Also prints ABS & ASA · Multi-material too - [Creality K1C](https://simplyprint.io/compatibility/creality-k1c): Compatible, 220 x 220 x 250 mm, Also by Creality · Similar build volume · Also prints ABS & ASA · Multi-material too - [Prusa MK4S](https://simplyprint.io/compatibility/prusa-mk4s): Compatible, 250 x 210 x 220 mm, Similar build volume · Also prints ABS & ASA · Multi-material too - [Anycubic Kobra S1](https://simplyprint.io/compatibility/anycubic-kobra-s1): Compatible, 250 x 250 x 250 mm, Similar build volume · Also prints ABS & ASA · Multi-material too ## Where to buy the Creality Ender-3 V3 Neo Combo - [Creality's global store](https://simplyprint.io/buy/8273) (Official store) (Affiliate link): $329.00 (Price at Creality Store, checked October 23, 2026) - [Creality Ender-3 V3 Neo](https://simplyprint.io/compatibility/creality-ender-3-v3-neo): Also sold without the multi-material unit. ## About Creality Creality is a Shenzhen 3D printer maker founded in 2014. Its low-cost Ender series, launched in 2017, made desktop 3D printing affordable for many hobbyists. It now sells Klipper-based K-series CoreXY printers, Ender and CR open-frame printers, the Hi and SPARKX beginner lines, the CFS multi-material system, 3D scanners and laser engravers, and runs the Creality Cloud model platform. It listed on the Hong Kong Stock Exchange in 2026. - Founded: 2014 - Headquarters: Shenzhen, China - Ownership: Listed on the Hong Kong Stock Exchange (3388.HK) since 2026; founder Jack Chen is chief executive - Website: https://www.creality.com Openness: Mostly open (3.6 of 5) Creality sits in the middle: its Klipper-based printers can be run locally with Fluidd and open slicers, and it publishes firmware source, but usually months after launch, and it dropped root access on its 2025 K1 revisions. - Firmware and custom firmware (3 of 5): Creality publishes Klipper firmware source for the K1, K2, Hi and Ender-3 V3 KE on GitHub under GPL, but after launch: the K1 source came about three months after the series launched in May 2023, the K2 and Hi sources in September 2025. Earlier K1 printers have an official root option with a published guide, but Creality's wiki says the 2025 K1C and K1 Max do not support root access. - Local control and integrations (4 of 5): Creality Print sends jobs over the local network with no account, and Creality Cloud is optional. The K2 series and Ender-3 V3 serve Fluidd on the printer, so other software can use Klipper's documented Moonraker API. On the K1 series, Creality's firmware notes treat Fluidd and Mainsail as add-ons owners install themselves, and Creality says the 2025 K1C and K1 Max do not support root access. The SPARKX i7 is set up through the Creality Cloud app. - Third-party filament, slicers and parts (4 of 5): Third-party filament works; Creality Print is an open-source (AGPL-3.0) slicer and OrcaSlicer supports Creality printers. Creality sells nozzle, hotend and extruder kits per model; newer K2 parts such as its nozzle kit are Creality designs. - Repairs and spare parts (4 of 5): Creality's store sells extruder, hotend, heating-block and print-head kits per model, and its wiki has parts lists and replacement guides for current printers (for example the K2 Plus and SPARKX i7 hotends). - Data and privacy (3 of 5): Local printing needs no account; Creality Cloud and its app need one. Creality's published privacy policy is written for its websites and services, allows use of data for targeted advertising, and says little about printer data or where it is stored. - Community and documentation (4 of 5): One of the largest user bases (second in consumer 3D printers by 2025 sales value, per figures in its listing), a public wiki with model-specific guides, firmware and slicer sources on GitHub, and an official forum. ### Pros - Klipper-based models can be run entirely on the local network through Fluidd, without an account. - Firmware for most current models and the Creality Print slicer are published as source on GitHub. - Wide range, from budget Ender printers to multi-colour K2 machines. - Spare-part kits and model-specific replacement guides are easy to find. - Very large user base, so community help is easy to find. ### Cons - Firmware source has usually appeared months after a model ships. - Root access, offered on earlier K1 printers, is not supported on the 2025 K1C and K1 Max. - The privacy policy says little about printer and cloud data. - The SPARKX line is built around the Creality Cloud app and an account. ### Track record - May 2026: Creality listed on the Main Board of the Hong Kong Stock Exchange (3388.HK), raising about HK$1.27 billion net. Its prospectus showed 2025 revenue of RMB 3.13 billion and a net loss of RMB 182.4 million, after a profit in 2024. - November 2025: Creality's wiki states that the 2025 revisions of the K1C and K1 Max do not support root access, which earlier K1 printers offered through an official option and guide. - September 2025: Creality published the Klipper source for its K2 series and for the Hi on GitHub under GPL-3.0. - August 2023: About three months after the K1 series launched, Creality published its K1 Klipper source on GitHub, followed by a repository with a root guide and Fluidd and Mainsail install instructions. How Creality compares with every other brand: https://simplyprint.io/articles/best-3d-printer Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. ## Frequently asked questions ### Is the Creality Ender-3 V3 Neo Combo compatible with SimplyPrint? We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Creality Ender-3 V3 Neo Combo, our compatibility check tells you in a few questions how it could connect. ### What slicer should I use for the Creality Ender-3 V3 Neo Combo? Use CrealityPrint, Creality's own slicer, made for its printers. You can run it in SimplyPrint's online slicer; there's no ready-made profile for the Creality Ender-3 V3 Neo Combo in it yet. ### What filament can the Creality Ender-3 V3 Neo Combo print? Creality lists PLA, PETG, TPU & flexibles and ABS & ASA for the Ender-3 V3 Neo Combo. ### What is the Creality Ender-3 V3 Neo Combo's bed size and build volume? The Creality Ender-3 V3 Neo Combo has a 220 x 220 mm print bed and prints up to 220 mm tall, a build volume of about 220 x 220 x 220 mm. See the full specifications table above for bed type, temperatures and more. ### When did the Creality Ender-3 V3 Neo Combo come out? Creality launched the Ender-3 V3 Neo Combo in October 2026. ### Where can I buy the Creality Ender-3 V3 Neo Combo? From Creality's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.