# Craftbot PLUS PRO: specs, SimplyPrint compatibility and setup > **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone. - By Craftbot, Hungary - Launched 2020 - Canonical page: https://simplyprint.io/compatibility/craftbot-plus-pro ## Craftbot PLUS PRO at a glance The Craftbot PLUS PRO is a 3D printer by Craftbot with a 250 x 200 x 200 mm build volume. - Build volume: 250 x 200 x 200 mm - Enclosure: Partly enclosed - Max print speed: 120 mm/s - Motion system: CoreXY - Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA) - Built-in camera: No - Connectivity: USB ## Connect the Craftbot PLUS PRO to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint | Not confirmed yet - help us find out | | | | Klipper (Moonraker) | Not confirmed yet - help us find out | | Craftbot does not name the firmware. ([Source](https://craftbot.com/products/craftbot-plus-pro)) | | OctoPrint (Directly, over USB) | Not confirmed yet - help us find out | | Same family as the Craftbot XL/2 (whose OctoPrint rows are legacy values); USB printing from a computer is not documented on the current page. ([Source](https://craftbot.com/products/craftbot-plus-pro)) | - [Help us confirm](https://simplyprint.io/compatibility/craftbot-plus-pro/confirm) ## What slicer to use for the Craftbot PLUS PRO None of the slicers in SimplyPrint's cloud has a ready-made profile for the Craftbot PLUS PRO, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match. - [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Craftbot PLUS PRO · Runs in the SimplyPrint cloud - [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Craftbot PLUS PRO · Runs in the SimplyPrint cloud - [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Craftbot PLUS PRO · Runs in the SimplyPrint cloud - [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Craftbot PLUS PRO · Runs in the SimplyPrint cloud - [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Craftbot PLUS PRO · Runs in the SimplyPrint cloud - [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Craftbot PLUS PRO · Runs in the SimplyPrint cloud - [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Craftbot PLUS PRO · Runs in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Craftbot PLUS PRO. ## Craftbot PLUS PRO specifications: bed size, print height and more ### Size - Build volume: 250 x 200 x 200 mm - Bed type: Rectangle - Bed size: 250 x 200 mm - Max print height: 200 mm ### Printing - Enclosure: Partly enclosed - Motion system: CoreXY - Max print speed: 120 mm/s - Max extruder temperature: 260 °C - Has heated bed: Yes - Max bed temperature: 110 °C - Number of nozzles: 1 - Toolheads: 1 - Direct drive: Yes - Probing tool / Auto Bed Leveling: No - Filament width: 1.75 mm ### Multi-material - Toolchanger or hotend changer: No - IDEX (independent dual extruders): No ### Connecting - Connectivity: USB - Built-in camera: No - Prints from: USB stick - Supports serial printing: Yes - Shipped firmware: The maker's own ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) ### The printer - Printer manufacturer / brand: Craftbot - Printer model name: PLUS PRO - Made by a company from: Hungary - Launched: 2020 [Read more by the manufacturer](https://craftbot.com/products/craftbot-plus-pro) ## What filament can the Craftbot PLUS PRO print? Filament compatibility for the Craftbot PLUS PRO: the materials Craftbot lists for it. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | On the maker's list of materials for this printer. | | PETG | Great | On the maker's list of materials for this printer. | | TPU & flexibles | Great | On the maker's list of materials for this printer. | | ABS & ASA | Great | On the maker's list of materials for this printer. | | Nylon (PA) | Great | On the maker's list of materials for this printer. | | Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. | | Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. | ## Printers like the Craftbot PLUS PRO that work with SimplyPrint - [Creality CR-200B](https://simplyprint.io/compatibility/creality-cr-200b): Compatible, 200 x 200 x 200 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA) - [Goofoo Mido](https://simplyprint.io/compatibility/goofoo-mido): Compatible, 200 x 200 x 200 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA) - [FrankenVoron Tridex](https://simplyprint.io/compatibility/frankenvoron-tridex): Expected to work, 225 x 250 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA) - [LulzBot TAZ SideKick 747](https://simplyprint.io/compatibility/lulzbot-taz-sidekick-747): Expected to work, 232 x 232 x 248 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA) ## Where to buy the Craftbot PLUS PRO - [Craftbot for the EU](https://simplyprint.io/buy/8268) (Official store): €1,499.00 (Price at Craftbot, checked October 23, 2026) ## Frequently asked questions ### Is the Craftbot PLUS PRO compatible with SimplyPrint? We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Craftbot PLUS PRO, our compatibility check tells you in a few questions how it could connect. ### What slicer should I use for the Craftbot PLUS PRO? Cura, PrusaSlicer and OrcaSlicer all work with the Craftbot PLUS PRO, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device. ### Can I use OrcaSlicer with the Craftbot PLUS PRO? Yes, but OrcaSlicer has no built-in profile for the Craftbot PLUS PRO that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match. ### What filament can the Craftbot PLUS PRO print? Craftbot lists PLA, PETG, TPU & flexibles, ABS & ASA and Nylon (PA) for the PLUS PRO. ### What is the Craftbot PLUS PRO's bed size and build volume? The Craftbot PLUS PRO has a 250 x 200 mm print bed and prints up to 200 mm tall, a build volume of about 250 x 200 x 200 mm. See the full specifications table above for bed type, temperatures and more. ### When did the Craftbot PLUS PRO come out? Craftbot launched the PLUS PRO in 2020. ### Where can I buy the Craftbot PLUS PRO? From Craftbot's own store, which has shops for the EU. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.