# Craftbot FLOW: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By Craftbot, Hungary
- Launched 2020
- Canonical page: https://simplyprint.io/compatibility/craftbot-flow

## Craftbot FLOW at a glance

The Craftbot FLOW is a 3D printer by Craftbot with a 300 x 200 x 250 mm build volume.

- Build volume: 300 x 200 x 250 mm
- Enclosure: Partly enclosed
- Max print speed: 160 mm/s
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA)
- Built-in camera: Yes
- Connectivity: Wi-Fi, Ethernet, USB

## Connect the Craftbot FLOW to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| Klipper (Moonraker) | Not confirmed yet - help us find out |  | Craftbot's own 'PR3DATOR' board with a Raspberry Pi HMI and web interface; the firmware is not named. ([Source](https://craftbot.com/products/craftbot-flow)) |
| OctoPrint (Directly, over USB) | Not confirmed yet - help us find out |  | Takes jobs through its web interface/IoT platform; printing over USB from a computer is not documented. ([Source](https://craftbot.com/products/craftbot-flow)) |

- [Help us confirm](https://simplyprint.io/compatibility/craftbot-flow/confirm)

## What slicer to use for the Craftbot FLOW

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Craftbot FLOW, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Craftbot FLOW · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Craftbot FLOW · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Craftbot FLOW · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Craftbot FLOW · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Craftbot FLOW · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Craftbot FLOW · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Craftbot FLOW · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Craftbot FLOW.

## Craftbot FLOW specifications: bed size, print height and more

### Size

- Build volume: 300 x 200 x 250 mm
- Bed type: Rectangle
- Bed size: 300 x 200 mm
- Max print height: 250 mm

### Printing

- Enclosure: Partly enclosed
- Max print speed: 160 mm/s
- Max extruder temperature: 300 °C
- Has heated bed: Yes
- Max bed temperature: 110 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, Ethernet, USB
- Built-in camera: Yes
- Prints from: USB stick
- USB socket for printing over USB: USB-B
- Supports serial printing: Yes
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Craftbot
- Printer model name: FLOW
- Made by a company from: Hungary
- Launched: 2020

[Read more by the manufacturer](https://craftbot.com/products/craftbot-flow)

## What filament can the Craftbot FLOW print?

Filament compatibility for the Craftbot FLOW: the materials Craftbot lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

## Printers like the Craftbot FLOW that work with SimplyPrint

- [Creality Sermoon D1](https://simplyprint.io/compatibility/creality-sermoon-d1): Compatible, 280 x 260 x 310 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)
- [Creality K3](https://simplyprint.io/compatibility/creality-k3): Expected to work, 260 x 260 x 260 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)
- [FrankenVoron Tridex](https://simplyprint.io/compatibility/frankenvoron-tridex): Expected to work, 225 x 250 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)
- [LulzBot TAZ SideKick 747](https://simplyprint.io/compatibility/lulzbot-taz-sidekick-747): Expected to work, 232 x 232 x 248 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)

## Where to buy the Craftbot FLOW

- [Craftbot for the EU](https://simplyprint.io/buy/8263) (Official store): €1,949.25 (Price at Craftbot, checked October 23, 2026)

## Frequently asked questions

### Is the Craftbot FLOW compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Craftbot FLOW, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the Craftbot FLOW?

Cura, PrusaSlicer and OrcaSlicer all work with the Craftbot FLOW, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the Craftbot FLOW?

Yes, but OrcaSlicer has no built-in profile for the Craftbot FLOW that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the Craftbot FLOW print?

Craftbot lists PLA, PETG, TPU & flexibles, ABS & ASA and Nylon (PA) for the FLOW.

### What is the Craftbot FLOW's bed size and build volume?

The Craftbot FLOW has a 300 x 200 mm print bed and prints up to 250 mm tall, a build volume of about 300 x 200 x 250 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Craftbot FLOW come out?

Craftbot launched the FLOW in 2020.

### Where can I buy the Craftbot FLOW?

From Craftbot's own store, which has shops for the EU. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.