# Craftbot FLOW XL: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By Craftbot, Hungary
- Launched 2020
- Canonical page: https://simplyprint.io/compatibility/craftbot-flow-xl

## Craftbot FLOW XL at a glance

The Craftbot FLOW XL is a 3D printer by Craftbot with a 300 x 200 x 500 mm build volume.

- Build volume: 300 x 200 x 500 mm
- Enclosure: Partly enclosed
- Max print speed: 160 mm/s
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA)
- Built-in camera: Yes
- Connectivity: Wi-Fi, Ethernet, USB

## Connect the Craftbot FLOW XL to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| Klipper (Moonraker) | Not confirmed yet - help us find out |  | Craftbot's own 'PR3DATOR' board with a Raspberry Pi HMI and web interface; the firmware is not named. ([Source](https://craftbot.com/products/craftbot-flow-xl)) |
| OctoPrint (Directly, over USB) | Not confirmed yet - help us find out |  | Takes jobs through its web interface/IoT platform; printing over USB from a computer is not documented. ([Source](https://craftbot.com/products/craftbot-flow-xl)) |

- [Help us confirm](https://simplyprint.io/compatibility/craftbot-flow-xl/confirm)

## What slicer to use for the Craftbot FLOW XL

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Craftbot FLOW XL, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Craftbot FLOW XL · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Craftbot FLOW XL · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Craftbot FLOW XL · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Craftbot FLOW XL · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Craftbot FLOW XL · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Craftbot FLOW XL · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Craftbot FLOW XL · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Craftbot FLOW XL.

## Craftbot FLOW XL specifications: bed size, print height and more

### Size

- Build volume: 300 x 200 x 500 mm
- Bed type: Rectangle
- Bed size: 300 x 200 mm
- Max print height: 500 mm

### Printing

- Enclosure: Partly enclosed
- Max print speed: 160 mm/s
- Max extruder temperature: 300 °C
- Has heated bed: Yes
- Max bed temperature: 110 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, Ethernet, USB
- Built-in camera: Yes
- Prints from: USB stick
- USB socket for printing over USB: USB-B
- Supports serial printing: Yes
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Craftbot
- Printer model name: FLOW XL
- Made by a company from: Hungary
- Launched: 2020

[Read more by the manufacturer](https://craftbot.com/products/craftbot-flow-xl)

## What filament can the Craftbot FLOW XL print?

Filament compatibility for the Craftbot FLOW XL: the materials Craftbot lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

## Printers like the Craftbot FLOW XL that work with SimplyPrint

- [Voron Voron Trident](https://simplyprint.io/compatibility/voron-voron-trident): Compatible, 350 x 350 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)
- [Vivedino Troodon 2.0](https://simplyprint.io/compatibility/vivedino-troodon-2-0): Compatible, 350 x 350 x 320 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)
- [Creality Sermoon D1](https://simplyprint.io/compatibility/creality-sermoon-d1): Compatible, 280 x 260 x 310 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)
- [QIDI i-fast](https://simplyprint.io/compatibility/qidi-i-fast): Compatible, 330 x 250 x 320 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)

## Where to buy the Craftbot FLOW XL

- [Craftbot for the EU](https://simplyprint.io/buy/8267) (Official store)

## Frequently asked questions

### Is the Craftbot FLOW XL compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Craftbot FLOW XL, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the Craftbot FLOW XL?

Cura, PrusaSlicer and OrcaSlicer all work with the Craftbot FLOW XL, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the Craftbot FLOW XL?

Yes, but OrcaSlicer has no built-in profile for the Craftbot FLOW XL that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the Craftbot FLOW XL print?

Craftbot lists PLA, PETG, TPU & flexibles, ABS & ASA and Nylon (PA) for the FLOW XL.

### What is the Craftbot FLOW XL's bed size and build volume?

The Craftbot FLOW XL has a 300 x 200 mm print bed and prints up to 500 mm tall, a build volume of about 300 x 200 x 500 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Craftbot FLOW XL come out?

Craftbot launched the FLOW XL in 2020.

### Where can I buy the Craftbot FLOW XL?

From Craftbot's own store, which has shops for the EU. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.