# Co Print Quadro: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By Co Print
- Canonical page: https://simplyprint.io/compatibility/co-print-quadro

## Co Print Quadro at a glance

The Co Print Quadro is a 3D printer by Co Print with a 300 x 300 x 300 mm build volume.

- Build volume: 300 x 300 x 300 mm
- Max print speed: 600 mm/s
- Motion system: Bed slinger
- Prints well: PLA, PETG
- Built-in camera: Yes

## Connect the Co Print Quadro to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| Klipper (Moonraker) | Not confirmed yet - help us find out |  | Co Print has not said what firmware Quadro runs. ([Source](https://coprint3d.com/pages/quadro)) |
| OctoPrint (Directly, over USB) | Not confirmed yet - help us find out |  | Not shipping; connectivity not published. ([Source](https://coprint3d.com/pages/quadro)) |

- [Help us confirm](https://simplyprint.io/compatibility/co-print-quadro/confirm)

## What slicer to use for the Co Print Quadro

None of the slicers in SimplyPrint's cloud can slice for the Co Print Quadro that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Co Print Quadro · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Co Print Quadro · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Co Print Quadro · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Co Print Quadro · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Co Print Quadro · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Co Print Quadro · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Co Print Quadro · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Co Print Quadro.

## Co Print Quadro specifications: bed size, print height and more

### Size

- Build volume: 300 x 300 x 300 mm
- Bed type: Square
- Bed size: 300 x 300 mm
- Max print height: 300 mm

### Printing

- Motion system: Bed slinger
- Max print speed: 600 mm/s
- Max extruder temperature: 300 °C
- Has heated bed: Yes
- Max bed temperature: 100 °C
- Number of nozzles: 4
- Toolheads: 4
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No

### Connecting

- Built-in camera: Yes
- Supports serial printing: Unknown
- Shipped firmware: Unknown

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Co Print
- Printer model name: Quadro

[Read more by the manufacturer](https://coprint3d.com/pages/quadro)

## What filament can the Co Print Quadro print?

Filament compatibility for the Co Print Quadro: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

## Printers like the Co Print Quadro that work with SimplyPrint

- [Creality K1 Max](https://simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Similar build volume
- [Snapmaker U1](https://simplyprint.io/compatibility/snapmaker-u1): Compatible, 270 x 270 x 270 mm, Similar build volume
- [Anycubic Kobra X](https://simplyprint.io/compatibility/anycubic-kobra-x): Compatible, 260 x 260 x 260 mm, Similar build volume
- [Bambu Lab H2S Combo](https://simplyprint.io/compatibility/bambu-lab-h2s-combo): Verified by SimplyPrint, 340 x 320 x 340 mm, Similar build volume

## Frequently asked questions

### Is the Co Print Quadro compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Co Print Quadro, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the Co Print Quadro?

None of the slicers in SimplyPrint's cloud can slice for the Co Print Quadro that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the Co Print Quadro print?

Based on its specs (hotend up to 300C, heated bed up to 100C), the Co Print Quadro handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.

### What is the Co Print Quadro's bed size and build volume?

The Co Print Quadro has a 300 x 300 mm print bed and prints up to 300 mm tall, a build volume of about 300 x 300 x 300 mm. See the full specifications table above for bed type, temperatures and more.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.