# CEL Robox RBX01: specs, SimplyPrint compatibility and setup

> **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong.

- By CEL, United Kingdom
- Launched November 2014
- Canonical page: https://simplyprint.io/compatibility/cel-robox-rbx01

## CEL Robox RBX01 at a glance

The CEL Robox RBX01 is a 3D printer by CEL with a 210 x 150 x 100 mm build volume.

- Build volume: 210 x 150 x 100 mm
- Enclosure: Fully enclosed
- Motion system: Bed slinger
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Connect the CEL Robox RBX01 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not expected to work |  |  |
| OctoPrint (Directly, over USB) | Not expected to work |  | Driven over USB by CEL's AutoMaker software (or CEL's Root box), not by generic G-code senders. ([Source](https://web.archive.org/web/20211231054258/https://cel-robox.com/technical)) |
| Klipper (Moonraker) | Not compatible |  | Runs CEL's own firmware ('We made our own user interface and firmware'). ([Source](https://web.archive.org/web/20211231054258/https://cel-robox.com/technical)) |

## What slicer to use for the CEL Robox RBX01

None of the slicers in SimplyPrint's cloud can slice for the CEL Robox RBX01 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the CEL Robox RBX01 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the CEL Robox RBX01 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the CEL Robox RBX01 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the CEL Robox RBX01 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the CEL Robox RBX01 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the CEL Robox RBX01 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the CEL Robox RBX01 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the CEL Robox RBX01.

## CEL Robox RBX01 specifications: bed size, print height and more

### Size

- Build volume: 210 x 150 x 100 mm
- Bed type: Rectangle
- Bed size: 210 x 150 mm
- Max print height: 100 mm

### Printing

- Enclosure: Fully enclosed
- Motion system: Bed slinger
- Max extruder temperature: 280 °C
- Has heated bed: Yes
- Max bed temperature: 150 °C
- Number of nozzles: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Connecting

- Supports serial printing: Unknown
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: CEL
- Printer model name: Robox RBX01
- Made by a company from: United Kingdom
- Launched: November 2014

[Read more by the manufacturer](https://web.archive.org/web/20211231054258/https://cel-robox.com/technical)

## What filament can the CEL Robox RBX01 print?

Filament compatibility for the CEL Robox RBX01: the materials CEL lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

## Printers like the CEL Robox RBX01 that work with SimplyPrint

- [Sovol Zero](https://simplyprint.io/compatibility/sovol-zero): Compatible, 152 x 152 x 152 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [PrintersForAnts Salad Fork](https://simplyprint.io/compatibility/printersforants-salad-fork): Compatible, 180 x 180 x 150 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Monoprice Maker Ultimate 2](https://simplyprint.io/compatibility/monoprice-maker-ultimate-2): Compatible, 200 x 150 x 150 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)
- [Bambu Lab P1S](https://simplyprint.io/compatibility/bambu-lab-p1s): Verified by SimplyPrint, 256 x 256 x 256 mm, Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Frequently asked questions

### Is the CEL Robox RBX01 compatible with SimplyPrint?

To our knowledge the CEL Robox RBX01 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

### What slicer should I use for the CEL Robox RBX01?

None of the slicers in SimplyPrint's cloud can slice for the CEL Robox RBX01 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the CEL Robox RBX01 print?

CEL lists PLA, ABS & ASA, Nylon (PA), Polycarbonate (PC), PETG and TPU & flexibles for the Robox RBX01.

### What is the CEL Robox RBX01's bed size and build volume?

The CEL Robox RBX01 has a 210 x 150 mm print bed and prints up to 100 mm tall, a build volume of about 210 x 150 x 100 mm. See the full specifications table above for bed type, temperatures and more.

### When did the CEL Robox RBX01 come out?

CEL launched the Robox RBX01 in November 2014.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.