# Builder Extreme 2000 PRO: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By Builder, Netherlands
- Launched November 2018
- Canonical page: https://simplyprint.io/compatibility/builder-extreme-2000-pro

## Builder Extreme 2000 PRO at a glance

The Builder Extreme 2000 PRO is a 3D printer by Builder with a 700 x 700 x 1700 mm build volume.

- Build volume: 700 x 700 x 1700 mm
- Enclosure: Fully enclosed
- Max print speed: 300 mm/s
- Prints well: PLA, PETG, TPU & flexibles
- Built-in camera: Yes
- Connectivity: Wi-Fi, USB, Ethernet

## Connect the Builder Extreme 2000 PRO to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| Klipper (Moonraker) | Not confirmed yet - help us find out |  | Builder does not say what firmware or controller it runs. ([Source](https://builder3dprinters.com/product/builder-extreme-2000-pro/)) |
| OctoPrint (Directly, over USB) | Not confirmed yet - help us find out |  | Has a USB port, but whether it prints over USB from a computer is not documented. ([Source](https://builder3dprinters.com/product/builder-extreme-2000-pro/)) |

- [Help us confirm](https://simplyprint.io/compatibility/builder-extreme-2000-pro/confirm)

## What slicer to use for the Builder Extreme 2000 PRO

None of the slicers in SimplyPrint's cloud can slice for the Builder Extreme 2000 PRO that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Builder Extreme 2000 PRO · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Builder Extreme 2000 PRO · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Builder Extreme 2000 PRO · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Builder Extreme 2000 PRO · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Builder Extreme 2000 PRO · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Builder Extreme 2000 PRO · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Builder Extreme 2000 PRO · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Builder Extreme 2000 PRO.

## Builder Extreme 2000 PRO specifications: bed size, print height and more

### Size

- Build volume: 700 x 700 x 1700 mm
- Bed type: Square
- Bed size: 700 x 700 mm
- Max print height: 1700 mm

### Printing

- Enclosure: Fully enclosed
- Max print speed: 300 mm/s
- Max extruder temperature: 250 °C
- Has heated bed: Yes
- Max bed temperature: 60 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: No
- Filament width: 1.75 mm

### Connecting

- Connectivity: Wi-Fi, USB, Ethernet
- Built-in camera: Yes
- Supports serial printing: Unknown
- Shipped firmware: Unknown

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Builder
- Printer model name: Extreme 2000 PRO
- Made by a company from: Netherlands
- Launched: November 2018
- Still made: Yes

[Read more by the manufacturer](https://builder3dprinters.com/product/builder-extreme-2000-pro/)

## What filament can the Builder Extreme 2000 PRO print?

Filament compatibility for the Builder Extreme 2000 PRO: the materials Builder lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

## Printers like the Builder Extreme 2000 PRO that work with SimplyPrint

- [MINGDA MD-1000 Pro](https://simplyprint.io/compatibility/mingda-md-1000-pro): Compatible, 1000 x 1000 x 1000 mm, Similar build volume
- [WASP 3MT HDP](https://simplyprint.io/compatibility/wasp-3mt-hdp): Compatible, 1000 x 1000 x 1000 mm, Similar build volume
- [MINGDA MD-1000D](https://simplyprint.io/compatibility/mingda-md-1000d): Compatible, 1000 x 1000 x 1000 mm, Similar build volume
- [MINGDA MD-1000 Pro+](https://simplyprint.io/compatibility/mingda-md-1000-pro-plus): Expected to work, 1000 x 1000 x 1000 mm, Similar build volume

## Where to buy the Builder Extreme 2000 PRO

- [Builder's global store](https://simplyprint.io/buy/8260) (Official store): Out of stock at Builder (Checked October 23, 2026)

## Frequently asked questions

### Is the Builder Extreme 2000 PRO compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Builder Extreme 2000 PRO, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the Builder Extreme 2000 PRO?

None of the slicers in SimplyPrint's cloud can slice for the Builder Extreme 2000 PRO that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the Builder Extreme 2000 PRO print?

Builder lists PLA, PETG and TPU & flexibles for the Extreme 2000 PRO.

### What is the Builder Extreme 2000 PRO's bed size and build volume?

The Builder Extreme 2000 PRO has a 700 x 700 mm print bed and prints up to 1700 mm tall, a build volume of about 700 x 700 x 1700 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Builder Extreme 2000 PRO come out?

Builder launched the Extreme 2000 PRO in November 2018.

### Where can I buy the Builder Extreme 2000 PRO?

From Builder's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.