# BigRep ONE.5X: specs, SimplyPrint compatibility and setup > **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong. - By BigRep, Germany - Launched April 2026 - Canonical page: https://simplyprint.io/compatibility/bigrep-one-5x ## BigRep ONE.5X at a glance The BigRep ONE.5X is a professional large-format filament printer with a one cubic metre build volume (1005 mm in each direction) and dual extruders reaching 280 degrees C. It is for companies, labs and universities that need full-scale parts, tooling and prototypes in one piece. - Build volume: 1005 x 1005 x 1005 mm - Prints well: PLA, PETG, TPU & flexibles, Carbon-fiber & glass-filled ## Connect the BigRep ONE.5X to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint | Not expected to work | | | | Klipper (Moonraker) | Not expected to work | | Closed industrial machine with BigRep's own controller, HMI and CONNECT software; nothing points to Klipper. ([Source](https://bigrep.com/bigrep-one/)) | | OctoPrint (Directly, over USB) | Not expected to work | | Industrial controller with its own HMI; no USB port for a computer is documented. ([Source](https://bigrep.com/bigrep-one/)) | ## What slicer to use for the BigRep ONE.5X None of the slicers in SimplyPrint's cloud can slice for the BigRep ONE.5X that we know of: it doesn't take standard G-code. Use the slicer its maker recommends. - [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the BigRep ONE.5X · Runs in the SimplyPrint cloud - [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the BigRep ONE.5X · Runs in the SimplyPrint cloud - [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the BigRep ONE.5X · Runs in the SimplyPrint cloud - [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the BigRep ONE.5X · Runs in the SimplyPrint cloud - [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the BigRep ONE.5X · Runs in the SimplyPrint cloud - [Cura](https://simplyprint.io/features/slicer/cura): No profile for the BigRep ONE.5X · Runs in the SimplyPrint cloud - [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the BigRep ONE.5X · Runs in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the BigRep ONE.5X. ## BigRep ONE.5X specifications: bed size, print height and more ### Size - Build volume: 1005 x 1005 x 1005 mm - Bed type: Square - Bed size: 1005 x 1005 mm - Max print height: 1005 mm ### Printing - Max extruder temperature: 280 °C - Has heated bed: Yes - Max bed temperature: 80 °C - Number of nozzles: 2 - Toolheads: 2 - Direct drive: No - Probing tool / Auto Bed Leveling: Yes - Filament width: 2.85 mm ### Multi-material - Toolchanger or hotend changer: No ### Connecting - Supports serial printing: Unknown - Shipped firmware: Unknown ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) ### The printer - Printer manufacturer / brand: BigRep - Printer model name: ONE.5X - Made by a company from: Germany - Launched: April 2026 - Still made: Yes [Read more by the manufacturer](https://bigrep.com/bigrep-one/) ## What filament can the BigRep ONE.5X print? Filament compatibility for the BigRep ONE.5X: the materials BigRep lists for it. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | On the maker's list of materials for this printer. | | PETG | Great | On the maker's list of materials for this printer. | | TPU & flexibles | Great | On the maker's list of materials for this printer. | | ABS & ASA | With care | Borderline - the bed runs a little cool and an enclosure is essential for ABS and ASA. | | Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. | | Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. | | Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. | ## When to choose the BigRep ONE.5X Choose the ONE.5X when the part itself is the problem: BigRep lists a 1005 x 1005 x 1005 mm volume, an open material system and German-built support, with training and service. It is an industrial purchase, with a weight of about 635 kg and a 208 to 240 V, 16 A supply, so it is not a printer to put in a classroom. We found no independent review of the ONE.5X, and BigRep gives no price, only a quote. For smaller engineering parts, an enclosed desktop printer such as the Qidi Max4 costs far less. ### Pros - A 1005 x 1005 x 1005 mm build volume, so large parts print in one piece (BigRep). - Dual PEX2 extruders in Single, Dual or Twin mode; Relay Mode takes over when a spool runs out, and Twin mode prints two identical parts at once (BigRep). - An open material system that takes third-party filament, with BigRep profiles for PLA, PETG, ABS, ASA, nylon, TPU and soluble BVOH (BigRep). - Automated calibration, adaptive bed levelling, input shaping and auto-sequential printing for non-stop production (BigRep). ### Cons - Needs a lot of room and power: about 635 kg, 1848 x 2070 x 1668 mm and 208 to 240 V at 16 A (BigRep). - No price published, only a quote, and 2.85 mm filament and diamond nozzles of 0.6 mm and up mean fine detail is not its job (BigRep). - Not expected to connect through Klipper or OctoPrint, and our facts list no SimplyPrint Client route, so check before planning around SimplyPrint. - No independent review found. ### Who it suits - Schools: Not a good fit. Industrial in size, weight and power, though BigRep names research and education as uses; it is a lab or university investment, not a classroom printer. - Hobbyists: Not a good fit. Far beyond a hobbyist's budget and space. - Businesses: Good fit. Full-scale prototypes, tooling and moulds in one piece, with BigRep's service and an open material system, but no SimplyPrint connection is expected. - Print farms: Not a good fit. Twin mode and auto-sequential printing help production, but each machine is huge and costly, and a SimplyPrint connection is not expected. ## Printers like the BigRep ONE.5X that work with SimplyPrint - [MINGDA MD-1000 Pro+](https://simplyprint.io/compatibility/mingda-md-1000-pro-plus): Expected to work, 1000 x 1000 x 1000 mm, Similar build volume · Also prints Carbon-fiber & glass-filled - [MINGDA MD-1000D Ultra](https://simplyprint.io/compatibility/mingda-md-1000d-ultra): Expected to work, 1000 x 1000 x 1000 mm, Similar build volume · Also prints Carbon-fiber & glass-filled - [Bambu Lab P2S Combo](https://simplyprint.io/compatibility/bambu-lab-p2s-combo): Verified by SimplyPrint, 256 x 256 x 256 mm, Also prints Carbon-fiber & glass-filled - [Bambu Lab X2D Combo](https://simplyprint.io/compatibility/bambu-lab-x2d-combo): Verified by SimplyPrint, 256 x 256 x 260 mm, Also prints Carbon-fiber & glass-filled ## Frequently asked questions ### Is the BigRep ONE.5X compatible with SimplyPrint? To our knowledge the BigRep ONE.5X is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer. ### What slicer should I use for the BigRep ONE.5X? None of the slicers in SimplyPrint's cloud can slice for the BigRep ONE.5X that we know of: it doesn't take standard G-code. Use the slicer its maker recommends. ### What filament can the BigRep ONE.5X print? BigRep lists PLA, PETG, TPU & flexibles and Carbon-fiber & glass-filled for the ONE.5X. ### What is the BigRep ONE.5X's bed size and build volume? The BigRep ONE.5X has a 1005 x 1005 mm print bed and prints up to 1005 mm tall, a build volume of about 1005 x 1005 x 1005 mm. See the full specifications table above for bed type, temperatures and more. ### When did the BigRep ONE.5X come out? BigRep launched the ONE.5X in April 2026. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.