# BCN3D Sigma D25: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By BCN3D, Spain
- Launched October 19, 2020
- BCN3D no longer makes or sells the BCN3D Sigma D25. That says nothing about SimplyPrint support: see below.
- Canonical page: https://simplyprint.io/compatibility/bcn3d-sigma-d25

## BCN3D Sigma D25 at a glance

The BCN3D Sigma D25 is a 3D printer by BCN3D with a 420 x 300 x 200 mm build volume.

- Build volume: 420 x 300 x 200 mm
- Prints well: PLA, PETG, TPU & flexibles
- Connectivity: SD card, Wi-Fi, Ethernet

## Connect the BCN3D Sigma D25 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| OctoPrint (Directly, over USB) | Not confirmed yet - help us find out |  | BCN3D's desktop IDEX; whether it prints over USB from a computer is not documented. ([Source](https://3dprintingindustry.com/news/interview-bcn3ds-launches-new-smart-cabinet-epsilon-w27-and-sigma-d25-3d-printers-technical-specifications-and-pricing-175909/)) |
| Klipper (Moonraker) | Not compatible |  | Ships BCN3D's own firmware, not Klipper. ([Source](https://3dprintingindustry.com/news/interview-bcn3ds-launches-new-smart-cabinet-epsilon-w27-and-sigma-d25-3d-printers-technical-specifications-and-pricing-175909/)) |

- [Help us confirm](https://simplyprint.io/compatibility/bcn3d-sigma-d25/confirm)

## What slicer to use for the BCN3D Sigma D25

None of the slicers in SimplyPrint's cloud has a ready-made profile for the BCN3D Sigma D25, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the BCN3D Sigma D25 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the BCN3D Sigma D25 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the BCN3D Sigma D25 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the BCN3D Sigma D25 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the BCN3D Sigma D25 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the BCN3D Sigma D25 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the BCN3D Sigma D25 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the BCN3D Sigma D25.

## BCN3D Sigma D25 specifications: bed size, print height and more

### Size

- Build volume: 420 x 300 x 200 mm
- Bed type: Rectangle
- Bed size: 420 x 300 mm
- Max print height: 200 mm

### Printing

- Max extruder temperature: 300 °C
- Has heated bed: Yes
- Max bed temperature: 80 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): Yes

### Connecting

- Connectivity: SD card, Wi-Fi, Ethernet
- Prints from: SD card
- Supports serial printing: Unknown
- Shipped firmware: Marlin

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: BCN3D
- Printer model name: Sigma D25
- Made by a company from: Spain
- Launched: October 19, 2020
- Still made: No, discontinued

[Read more by the manufacturer](http://web.archive.org/web/20230611020102/https://www.bcn3d.com/bcn3d-sigma-d25)

## What filament can the BCN3D Sigma D25 print?

Filament compatibility for the BCN3D Sigma D25: the materials BCN3D lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | With care | Borderline - the bed runs a little cool and an enclosure is essential for ABS and ASA. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

## Printers like the BCN3D Sigma D25 that work with SimplyPrint

- [FLSUN Super Racer](https://simplyprint.io/compatibility/flsun-super-racer): Compatible, 260 x 260 x 330 mm, Similar build volume
- [Creality Ender-3 S1 Plus](https://simplyprint.io/compatibility/creality-ender-3-s1-plus): Compatible, 300 x 300 x 300 mm, Similar build volume
- [Creality Ender-3 Max Neo](https://simplyprint.io/compatibility/creality-ender-3-max-neo): Compatible, 300 x 300 x 320 mm, Similar build volume
- [Voron Voron Trident](https://simplyprint.io/compatibility/voron-voron-trident): Compatible, 350 x 350 x 250 mm, Similar build volume

## What to buy instead of the BCN3D Sigma D25

BCN3D no longer makes or sells the Sigma D25 new. These printers like it are on sale today, and work with SimplyPrint.

- [FLSUN Super Racer](https://simplyprint.io/compatibility/flsun-super-racer): Similar build volume ([Buy from FLSUN](https://simplyprint.io/buy/8143))
- [Creality Ender-3 S1 Plus](https://simplyprint.io/compatibility/creality-ender-3-s1-plus): Similar build volume ([Buy from Creality](https://simplyprint.io/buy/7970), Affiliate link)
- [Creality Ender-3 Max Neo](https://simplyprint.io/compatibility/creality-ender-3-max-neo): Similar build volume ([Buy from Creality](https://simplyprint.io/buy/7971), Affiliate link)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the BCN3D Sigma D25 compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a BCN3D Sigma D25, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the BCN3D Sigma D25?

Cura, PrusaSlicer and OrcaSlicer all work with the BCN3D Sigma D25, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the BCN3D Sigma D25?

Yes, but OrcaSlicer has no built-in profile for the BCN3D Sigma D25 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the BCN3D Sigma D25 print?

BCN3D lists PLA, PETG and TPU & flexibles for the Sigma D25.

### What is the BCN3D Sigma D25's bed size and build volume?

The BCN3D Sigma D25 has a 420 x 300 mm print bed and prints up to 200 mm tall, a build volume of about 420 x 300 x 200 mm. See the full specifications table above for bed type, temperatures and more.

### When did the BCN3D Sigma D25 come out?

BCN3D launched the Sigma D25 on October 19, 2020. It has since been discontinued, so you can't buy it new from BCN3D any more.

### Is the BCN3D Sigma D25 still sold?

No. BCN3D no longer makes or sells the Sigma D25 new. Printers like it you can buy today: FLSUN Super Racer, Creality Ender-3 S1 Plus and Creality Ender-3 Max Neo.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.