# BCN3D Omega I60: specs, SimplyPrint compatibility and setup

> **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong.

- By BCN3D, Spain
- Launched June 2023
- Canonical page: https://simplyprint.io/compatibility/bcn3d-omega-i60

## BCN3D Omega I60 at a glance

The BCN3D Omega I60 is a 3D printer by BCN3D with a 450 x 300 x 450 mm build volume.

- Build volume: 450 x 300 x 450 mm
- Enclosure: Fully enclosed
- Motion system: Other kinematics
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Connectivity: USB, Wi-Fi, Ethernet

## Connect the BCN3D Omega I60 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not expected to work |  |  |
| OctoPrint (Directly, over USB) | Not expected to work |  | Prints from a USB drive or over Wi-Fi/Ethernet through BCN3D Cloud; no USB port for a computer is documented. ([Source](https://bcn3d.com/wp-content/uploads/2024/10/BCN3D-Omega-I60-Product-Datasheet.pdf)) |
| Klipper (Moonraker) | Not compatible |  | Ships a custom Marlin 2.1 build, not Klipper. ([Source](https://www.bcn3d.com/bcn3d-omega/)) |

## What slicer to use for the BCN3D Omega I60

None of the slicers in SimplyPrint's cloud has a ready-made profile for the BCN3D Omega I60, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the BCN3D Omega I60 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the BCN3D Omega I60 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the BCN3D Omega I60 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the BCN3D Omega I60 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the BCN3D Omega I60 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the BCN3D Omega I60 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the BCN3D Omega I60 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the BCN3D Omega I60.

## BCN3D Omega I60 specifications: bed size, print height and more

### Size

- Build volume: 450 x 300 x 450 mm
- Bed type: Rectangle
- Bed size: 450 x 300 mm
- Max print height: 450 mm

### Printing

- Enclosure: Fully enclosed
- Motion system: Other kinematics
- Max extruder temperature: 300 °C
- Has heated bed: Yes
- Max bed temperature: 120 °C
- Heated chamber: Up to 70 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): Yes

### Connecting

- Connectivity: USB, Wi-Fi, Ethernet
- Prints from: USB stick
- Supports serial printing: No
- Shipped firmware: Marlin

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: BCN3D
- Printer model name: Omega I60
- Made by a company from: Spain
- Launched: June 2023
- Still made: Yes

[Read more by the manufacturer](https://www.bcn3d.com/bcn3d-omega/)

## What filament can the BCN3D Omega I60 print?

Filament compatibility for the BCN3D Omega I60: the materials BCN3D lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Good | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |

## Printers like the BCN3D Omega I60 that work with SimplyPrint

- [Creality K2 Plus Combo](https://simplyprint.io/compatibility/creality-k2-plus-combo): Compatible, 350 x 350 x 350 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [FLSUN S1](https://simplyprint.io/compatibility/flsun-s1): Compatible, 320 x 320 x 430 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Anycubic Kobra S1 Max Combo](https://simplyprint.io/compatibility/anycubic-kobra-s1-max-combo): Compatible, 350 x 350 x 350 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Mattershaper Multiplexer](https://simplyprint.io/compatibility/mattershaper-multiplexer): Compatible, 520 x 300 x 400 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled

## Where to buy the BCN3D Omega I60

- [BCN3D's global store](https://simplyprint.io/buy/8257) (Official store)

## Frequently asked questions

### Is the BCN3D Omega I60 compatible with SimplyPrint?

To our knowledge the BCN3D Omega I60 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

### What slicer should I use for the BCN3D Omega I60?

Cura, PrusaSlicer and OrcaSlicer all work with the BCN3D Omega I60, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the BCN3D Omega I60?

Yes, but OrcaSlicer has no built-in profile for the BCN3D Omega I60 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the BCN3D Omega I60 print?

BCN3D lists PLA, ABS & ASA, Nylon (PA) and Carbon-fiber & glass-filled for the Omega I60.

### What is the BCN3D Omega I60's bed size and build volume?

The BCN3D Omega I60 has a 450 x 300 mm print bed and prints up to 450 mm tall, a build volume of about 450 x 300 x 450 mm. See the full specifications table above for bed type, temperatures and more.

### When did the BCN3D Omega I60 come out?

BCN3D launched the Omega I60 in June 2023.

### Where can I buy the BCN3D Omega I60?

From BCN3D's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.