# Bambu Lab X2D FarmLoop: specs, SimplyPrint compatibility and setup
> **Verified by SimplyPrint** (We're sure). We've tested it with SimplyPrint on the printer itself.
- By Bambu Lab, China
- Succeeds the [Bambu Lab X1-Carbon](https://simplyprint.io/compatibility/bambu-lab-x1-carbon)
- Canonical page: https://simplyprint.io/compatibility/bambu-lab-x2d-farmloop
## Bambu Lab X2D FarmLoop at a glance
The X2D is Bambu Lab's enclosed dual-nozzle CoreXY printer: a 256 x 256 x 260 mm plate, a 300 °C main nozzle, a 65 °C actively heated chamber and a second nozzle that prints support or another material. It is for makers and small businesses who want clean multi-material prints and easy support removal in an X1C-style machine.
- Build volume: 256 x 256 x 260 mm
- Multi-material units it works with: Bambu Lab AMS, Bambu Lab AMS 2 Pro, Bambu Lab AMS HT
- Enclosure: Fully enclosed
- Max print speed: 1000 mm/s
- Motion system: CoreXY
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Built-in camera: Yes
- Connectivity: Wi-Fi, USB
## Connect the Bambu Lab X2D FarmLoop to SimplyPrint
| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint Client | Verified by SimplyPrint | A computer or Raspberry Pi on the same network that stays on, running the SimplyPrint Client | |
| Klipper (Moonraker) | Not compatible | | |
| OctoPrint (Directly, over USB) | Not compatible | | [Not directly: the community OctoPrint plugin BambuPrinter connects it over the network instead](https://github.com/jneilliii/OctoPrint-BambuPrinter) |
- [How to set up SimplyPrint on Bambu Lab X2D FarmLoop](https://simplyprint.io/setup-guide/bambu-lab/x2d.md)
### What works with SimplyPrint
Connected through SimplyPrint Client in LAN-only mode, SimplyPrint supports everything the Bambu Lab X2D FarmLoop lets other software do: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control, filament mapping for its multi-material unit and AutoPrint. The only exceptions are what the Bambu Lab X2D FarmLoop doesn't let other software do: baby stepping, bed leveling and Z-Offset Calibration.
### Bambu Lab X2D FarmLoop owners on SimplyPrint
SimplyPrint users rate it 4.0 out of 5 (6 verified owners).
- SimplyPrint Client: 4.0 out of 5 (6 verified owners)
## What slicer to use for the Bambu Lab X2D FarmLoop
Bambu Lab printers use BambuStudio, Bambu Lab's own slicer. There's no ready-made profile for the Bambu Lab X2D FarmLoop in our cloud yet.
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No ready-made profile for the Bambu Lab X2D FarmLoop yet · Bambu Lab's own slicer · Runs in the SimplyPrint cloud
- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Bambu Lab X2D FarmLoop · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Bambu Lab X2D FarmLoop · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Bambu Lab X2D FarmLoop · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Bambu Lab X2D FarmLoop · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Bambu Lab X2D FarmLoop · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Bambu Lab X2D FarmLoop · Runs in the SimplyPrint cloud
We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Bambu Lab X2D FarmLoop.
## The app for the Bambu Lab X2D FarmLoop
SimplyPrint works as the Bambu Lab X2D FarmLoop's app: on your phone and in any browser, with a slicer in the cloud.
- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.
[Connect the Bambu Lab X2D FarmLoop to SimplyPrint, free](https://simplyprint.io/setup-guide/bambu-lab/x2d) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)
[SimplyPrint's print farm software for Bambu Lab](https://simplyprint.io/print-farms/bambu-lab)
## Automate the Bambu Lab X2D FarmLoop
**Enclosed printers push their prints out.** The Bambu Lab X2D's bed only moves up and down inside its enclosure, so instead of swapping plates, the toolhead can push the cooled print off the plate and out through the front. The front has to be open while it runs. For example: [FarmLoop](https://simplyprint.io/features/autoprint/farmloop), [AutoClear](https://simplyprint.io/features/autoprint/autoclear).
- [Bambu Lab X2D FarmLoop](https://simplyprint.io/compatibility/bambu-lab-x2d-farmloop): Pushes finished prints off the plate ([FarmLoop with AutoPrint](https://simplyprint.io/features/autoprint/farmloop))
### Other ways to automate it
- [Push prints off with the toolhead](https://simplyprint.io/features/autoprint/push-off): On a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.
[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.
## Bambu Lab X2D FarmLoop specifications: bed size, print height and more
### Size
- Build volume: 256 x 256 x 260 mm
- Bed type: Square
- Bed size: 256 x 256 mm
- Max print height: 260 mm
### Printing
- Enclosure: Fully enclosed
- Motion system: CoreXY
- Max print speed: 1000 mm/s
- Max extruder temperature: 300 °C
- Has heated bed: Yes
- Max bed temperature: 120 °C
- Heated chamber: Up to 65 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm
### Multi-material
- Multi-material units it works with: Bambu Lab AMS, Bambu Lab AMS 2 Pro, Bambu Lab AMS HT
- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No
### Connecting
- Connectivity: Wi-Fi, USB
- Built-in camera: Yes
- Supports serial printing: No
- Shipped firmware: The maker's own
### Files and slicing
- Supported file formats: G-code (.gcode, .gco, .g), Zip-format files (e.g., 3MF)
- Slicer profile name(s): `Bambu Lab X2D`
- Slicer program download: [Download slicer program](https://bambulab.com/download)
- Has start options: Yes (Available options: Use AMS, Bed Leveling, Flow Calibration, Timelapse)
### The printer
- Printer manufacturer / brand: Bambu Lab
- Printer model name: X2D FarmLoop
- Made by a company from: China
## What filament can the Bambu Lab X2D FarmLoop print?
Filament compatibility for the Bambu Lab X2D FarmLoop: the materials Bambu Lab lists for it.
| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
### Best filament for the Bambu Lab X2D FarmLoop
Filaments the Bambu Lab X2D FarmLoop prints well, Bambu Lab's own first, then the best known.
- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [Bambu Lab ABS](https://simplyprint.io/filaments/bambu-lab/abs): ABS, 240-270 °C
- [Bambu Lab ASA](https://simplyprint.io/filaments/bambu-lab/asa): ASA, 240-270 °C
- [ELEGOO PLA](https://simplyprint.io/filaments/elegoo/pla): PLA, 190-220 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 200-240 °C
- [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
## When to choose the Bambu Lab X2D FarmLoop
Choose the X2D when you often print in two materials, for example a part with easy-peel support from the second nozzle, or want fast colour swaps with little purge waste, in an enclosed machine that handles ABS, ASA, nylon and PC. For more than two filaments it works with the AMS, AMS 2 Pro or AMS HT; the X2D AMS Combo includes an AMS 2 Pro. The second nozzle is Bowden-fed, so it is slower and cannot print normal TPU without workarounds (Tom's Hardware, TechRadar). If you regularly print four or more colours, the H2C is built for many-colour prints with almost no purge waste and has a bigger plate (330 x 320 x 325 mm); if you never need a second nozzle, a single-nozzle Bambu costs less.
### Pros
- A second nozzle prints support or another material, giving easy-peel support and fast colour swaps with minimal purge waste (Bambu, TechRadar).
- Fully enclosed with a 65 °C actively heated chamber and a 300 °C main nozzle, so ABS, ASA and nylon are in range (Bambu).
- Three-stage filtration (G3, H12 HEPA, carbon), UL 2904 certification with Bambu PLA and PETG, and under 50 dB in typical use (Bambu); Notebookcheck found the filtration effective but not complete.
- TechRadar ran it for 250 hours and print after print came out without issue, and called it a solid successor to the X1C.
- Great for multi-material with the AMS, AMS 2 Pro or AMS HT; Bambu quotes up to 25 colours.
- Works with SimplyPrint through the SimplyPrint Client, a verified connection.
### Cons
- The auxiliary nozzle is Bowden-fed and runs at about 200 mm/s, adding around ten minutes to a two-hour print (TechRadar), and it cannot print normal TPU without workarounds (Tom's Hardware).
- TechRadar found Bambu Studio's filament and nozzle assignment needs work, and Notebookcheck notes the AMS 2 Pro has no TPU support.
- Dual-nozzle hardware costs more: Tom's Hardware lists $649 ($899 as a Combo), Notebookcheck calls the price high, and the 256 x 256 x 260 mm plate is smaller than the H2C's.
- By default it runs through Bambu Lab's own software and cloud, which some organisations' compliance rules don't allow; with SimplyPrint it can run without them and use SimplyPrint's European cloud, in Bambu Lab's LAN-only mode (with Developer Mode on current firmware, which Bambu Lab doesn't support).
### Who it suits
- Schools: Good fit. Enclosed, filtered and under 50 dB per Bambu, with an AI camera, and SimplyPrint can hold student prints for approval; it is a costly machine and the two-nozzle setup is more to learn than a single-nozzle printer.
- Hobbyists: Great fit. Dual-material and multi-colour printing with easy support removal, good print quality and little purge waste, if you accept the slower second nozzle.
- Businesses: Good fit. Enclosed and reliable in TechRadar's 250-hour test, with ABS, ASA, nylon and PC in range; the second nozzle is limited and the closed Bambu ecosystem is the compliance question.
- Print farms: Good fit. Dependable and verified with the SimplyPrint Client for remote control, but the unit price is high, the plate is mid-sized and AMS refills still need a person.
## The Bambu Lab X series
- [Bambu Lab X1-Carbon](https://simplyprint.io/compatibility/bambu-lab-x1-carbon): Launched 2022
- [Bambu Lab X1](https://simplyprint.io/compatibility/bambu-lab-x1): Launched May 2022
- [Bambu Lab X1E](https://simplyprint.io/compatibility/bambu-lab-x1e): Launched October 13, 2023
- **Bambu Lab X2D**: Launched April 14, 2026. Succeeds the X1-Carbon
## Compare the Bambu Lab X2D FarmLoop with similar printers
- [Bambu Lab P1S](https://simplyprint.io/compatibility/bambu-lab-p1s): Verified by SimplyPrint, 256 x 256 x 256 mm, Also by Bambu Lab · Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) · Multi-material too
- [Bambu Lab P2S Combo](https://simplyprint.io/compatibility/bambu-lab-p2s-combo): Verified by SimplyPrint, 256 x 256 x 256 mm, Also by Bambu Lab · Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled · Multi-material too
- [Creality K1C](https://simplyprint.io/compatibility/creality-k1c): Compatible, 220 x 220 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) · Multi-material too
- [Creality K1](https://simplyprint.io/compatibility/creality-k1): Compatible, 220 x 220 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) · Multi-material too
- [Compare the Bambu Lab X2D FarmLoop with other printers](https://simplyprint.io/compatibility/compare?compare=bambu-lab-x2d-farmloop#choose)
## About Bambu Lab
Bambu Lab is a Shenzhen company founded in 2020 by former DJI engineers. It makes FDM printers in four families (A, P, X and H), the AMS multi-material units, the Bambu Studio slicer, the Bambu Handy app and the MakerWorld model site, and designs them to be used together. Its printers are used by beginners, hobbyists, schools and print farms.
- Founded: 2020
- Headquarters: Shenzhen, China
- Ownership: Privately held; founded by CEO Ye Tao and other former DJI staff, with venture investors (BGR, 2026)
- Website: https://bambulab.com
Openness: Mostly closed (2.3 of 5)
Bambu Lab works like Apple: printer, slicer, app, cloud and multi-material system come from one company and are made to work together. Filament and slicer choice stay open, but the firmware is closed and signed, and since 2025 third-party control needs Bambu Connect or the unsupported Developer Mode.
- Firmware and custom firmware (1 of 5): The printer firmware is Bambu's own and closed; in 2022 Bambu said it would keep it in-house. Its security white paper describes secure boot that only runs verified firmware on X1, H2, P1 and A1 printers. Bambu publishes the GPL parts it uses (Linux kernel, U-Boot, BusyBox) but not the printer software. Rooting the X1 only became possible through a security flaw the X1Plus project used in 2024; Bambu then published a one-off rootable X1 firmware for owners who give up their warranty, and blocks rooting in later firmware.
- Local control and integrations (2 of 5): LAN Only mode prints and monitors from Bambu Studio or Bambu Connect without internet or an account; the Handy app, printing from outside the network and print history need Bambu's cloud. Since the 2025 authorization firmware, other software can only read status in normal mode. Full control needs Developer Mode, which cuts the cloud link and which Bambu says it cannot support because the protocols are not official. Bambu documents no local protocol; it offers a file hand-off to Bambu Connect and a Local Server SDK on application.
- Third-party filament, slicers and parts (3 of 5): Third-party filament works, and Bambu publicly denied in 2025 that it would restrict it. OrcaSlicer and other slicers can be used, but since the 2025 firmware they send and control prints through Bambu Connect or Developer Mode. Hotends are Bambu's own designs, and Bambu says it cannot promise long-term support for accessories that control the printer unless it approved them first.
- Repairs and spare parts (4 of 5): Bambu's store sells individual spare parts down to motors, belts, encoders and boards, and its wiki has step-by-step replacement guides for each model (for example the P2S hotend and the H2D/H2C AP board). Many parts, hotends included, are Bambu-specific, so spares come from Bambu.
- Data and privacy (3 of 5): Cloud features need a Bambu account, while LAN Only mode keeps jobs on the local network. Bambu publishes a Trust Center and a 38-page security white paper, says it holds ISO/IEC 27001, ISO/IEC 27701 and TRUSTe certifications, and runs a paid bug bounty. In August 2023 a cloud outage made some printers start earlier jobs on their own; Bambu apologised.
- Community and documentation (4 of 5): Very large user community, the MakerWorld model site, a detailed wiki and a blog where Bambu explains its policy changes. Bambu Studio is developed in public on GitHub with an open issue tracker. The printer protocol is not documented, and Developer Mode is unsupported.
### Pros
- Printer, slicer, app and AMS come from one company and are designed to work together, which makes a first setup simple.
- Step-by-step repair guides for each model and individual spare parts sold in Bambu's store.
- LAN Only mode works without internet or an account.
- Bambu Studio is open source, and third-party filament works.
- Publishes security certifications and runs a public bug bounty.
### Cons
- Firmware is closed and signed; current models have no supported way to run custom firmware.
- Since the 2025 firmware, third-party software and accessories need Bambu Connect or the unsupported Developer Mode to control the printer.
- Remote printing, the Handy app and print history depend on Bambu's cloud.
- Hotends and many parts are Bambu-specific, so spares come from Bambu.
- In 2026 a US jury found the X1, P1 and A1 infringe Stratasys patents; Bambu is appealing.
### Track record
- September 2026: A US federal jury in Texas found that Bambu Lab's X1, P1 and A1 printers infringe Stratasys patents on prime towers and bed levelling, and awarded Stratasys $27.6 million. No injunction was placed on the printers. Bambu told Tom's Hardware it disagrees with the verdict and intends to seek post-trial review and appeal. Stratasys had filed two suits in 2024; more patents are still to be decided.
- May 2026: Bambu Lab pressed the developer of 'OrcaSlicer-bambulab', a fork that restored direct cloud printing from OrcaSlicer, to remove it, according to Manufactur3D. On 7 May Bambu said the fork impersonated the official Bambu Studio client to its cloud, which its user agreement does not allow, and that modifying and sharing its AGPL code remains fine. The developer disputed the claims.
- October 2025: Bambu Lab opened a Trust Center with a security white paper and listed ISO/IEC 27001, ISO/IEC 27701 and TRUSTe privacy certifications. A year later it said its bug bounty had worked with over 100 researchers and that it had added a public security update log.
- January 20, 2025: After criticism from users and print farms, Bambu Lab announced an optional Developer Mode for X1, P1, A1 and A1 mini that leaves MQTT, FTP and the live stream open for third-party software in LAN mode, without official support. It also said LAN mode via Bambu Connect needs neither internet nor an account, and that third-party filament would not be restricted.
- January 16, 2025: Bambu Lab announced firmware with 'authorization control', first for the X1: starting prints, moving axes, changing temperatures and binding the printer now require Bambu-approved software, also in LAN mode. On updated printers, third-party slicers and accessories such as the Panda Touch could no longer control the printer except through Bambu Connect; reading status still worked. Bambu cited security and up to 30 million unauthorised cloud requests a day; older firmware stayed optional.
- March 2024: After the X1Plus jailbreak, Bambu Lab published a one-off rootable firmware for the X1 series for owners who give up their warranty support. It said it does not support X1Plus, and that firmware after it would block rooting again.
- February 2024: Bambu Lab extended its A1 heatbed-cable callback to a recall of all A1 printers and asked owners to stop using them. It reported electrical faults in under 0.1% of units and offered a full refund plus an $80 voucher, or a redesigned heatbed plus a $120 voucher and six extra months of warranty. The A1 mini was not affected.
- January 2024: Community developers rooted the X1 series through a security flaw in its firmware (up to version 1.07) and released the X1Plus custom firmware. Bambu Lab closed the flaw in later firmware.
- August 2023: During a Bambu cloud outage on 15 August 2023, some printers started print jobs without user action, because jobs stuck in the cloud were resent when service returned. Bambu apologised, took responsibility and said it would add checks before a print starts.
- May 2022: Before its first printers shipped, Bambu Lab said its firmware would stay closed and in-house to remain competitive, and promised to open-source everything if the company ever could not survive.
How Bambu Lab compares with every other brand: https://simplyprint.io/articles/best-3d-printer
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
## Frequently asked questions
### Is the Bambu Lab X2D FarmLoop compatible with SimplyPrint?
Yes. You can connect the Bambu Lab X2D FarmLoop to SimplyPrint via SimplyPrint Client, then slice, queue, start and monitor prints from your browser or the mobile app.
### How do I connect the Bambu Lab X2D FarmLoop to SimplyPrint?
Follow our step-by-step setup guide for the Bambu Lab X2D FarmLoop. It shows how to connect it via SimplyPrint Client, what you need for each, and which to pick.
### What slicer should I use for the Bambu Lab X2D FarmLoop?
Use BambuStudio, Bambu Lab's own slicer, made for its printers. You can run it in SimplyPrint's online slicer; there's no ready-made profile for the Bambu Lab X2D FarmLoop in it yet.
### Can I use OrcaSlicer with the Bambu Lab X2D FarmLoop?
Yes, but OrcaSlicer has no built-in profile for the Bambu Lab X2D FarmLoop that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
### What filament can the Bambu Lab X2D FarmLoop print?
Bambu Lab lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC) and Carbon-fiber & glass-filled for the X2D FarmLoop.
### Does the Bambu Lab X2D FarmLoop work with OctoPrint or Klipper?
Not directly: a community OctoPrint plugin can connect it over the network instead. But you don't need either: SimplyPrint connects to the Bambu Lab X2D FarmLoop via SimplyPrint Client.
### What is the Bambu Lab X2D FarmLoop's bed size and build volume?
The Bambu Lab X2D FarmLoop has a 256 x 256 mm print bed and prints up to 260 mm tall, a build volume of about 256 x 256 x 260 mm. See the full specifications table above for bed type, temperatures and more.
### Can the Bambu Lab X2D FarmLoop eject prints automatically?
Yes, with an AutoPrint kit made for it: Bambu Lab X2D FarmLoop. SimplyPrint's AutoPrint then starts the next job from your queue each time the plate is clear, so it keeps printing on its own.
---
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.