# Artillery 3D M1 Pro: specs, SimplyPrint compatibility and setup > **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone. - By Artillery 3D, China - Launched March 2025 - Canonical page: https://simplyprint.io/compatibility/artillery-3d-m1-pro ## Artillery 3D M1 Pro at a glance The M1 Pro is Artillery's enclosed CoreXY with a 260 mm build cube, a 320 degrees C hardened nozzle, a heated chamber and carbon filtration. It is for hobbyists who want a closed, fast printer for ABS, ASA and carbon-filled nylons at a low price. - Build volume: 260 x 260 x 260 mm - Enclosure: Fully enclosed - Max print speed: 600 mm/s - Motion system: CoreXY - Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled - Built-in camera: Yes - Connectivity: Wi-Fi, SD card ## Connect the Artillery 3D M1 Pro to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint | Not confirmed yet - help us find out | | | | Klipper (Moonraker) | Not confirmed yet - help us find out | | Artillery OS is 'based on Klipper' but closed ('SSH connection is not supported. Artillery OS is a closed-source system'); nothing shows whether Moonraker is reachable. ([Source](https://www.artillery3d.com/products/m1-carbon)) | | OctoPrint (Directly, over USB) | Not expected to work | | Klipper-based closed OS; jobs go over Wi-Fi/LAN or SD card, no serial printing documented. ([Source](https://www.artillery3d.com/products/m1-carbon)) | - [Help us confirm](https://simplyprint.io/compatibility/artillery-3d-m1-pro/confirm) ## What slicer to use for the Artillery 3D M1 Pro None of the slicers in SimplyPrint's cloud can slice for the Artillery 3D M1 Pro that we know of: it doesn't take standard G-code. Use the slicer its maker recommends. - [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Artillery 3D M1 Pro · Runs in the SimplyPrint cloud - [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Artillery 3D M1 Pro · Runs in the SimplyPrint cloud - [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Artillery 3D M1 Pro · Runs in the SimplyPrint cloud - [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Artillery 3D M1 Pro · Runs in the SimplyPrint cloud - [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Artillery 3D M1 Pro · Runs in the SimplyPrint cloud - [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Artillery 3D M1 Pro · Runs in the SimplyPrint cloud - [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Artillery 3D M1 Pro · Runs in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Artillery 3D M1 Pro. ## Artillery 3D M1 Pro specifications: bed size, print height and more ### Size - Build volume: 260 x 260 x 260 mm - Bed type: Square - Bed size: 260 x 260 mm - Max print height: 260 mm ### Printing - Enclosure: Fully enclosed - Motion system: CoreXY - Max print speed: 600 mm/s - Max extruder temperature: 320 °C - Has heated bed: Yes - Max bed temperature: 120 °C - Heated chamber: Up to 60 °C - Number of nozzles: 1 - Toolheads: 1 - Direct drive: Yes - Probing tool / Auto Bed Leveling: Yes - Filament width: 1.75 mm ### Multi-material - Toolchanger or hotend changer: No - IDEX (independent dual extruders): No ### Connecting - Connectivity: Wi-Fi, SD card - Built-in camera: Yes - Prints from: SD card - Supports serial printing: Unknown - Shipped firmware: The maker's own ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) ### The printer - Printer manufacturer / brand: Artillery 3D - Printer model name: M1 Pro - Made by a company from: China - Launched: March 2025 [Read more by the manufacturer](https://www.artillery3d.com/products/m1-carbon) ## What filament can the Artillery 3D M1 Pro print? Filament compatibility for the Artillery 3D M1 Pro: the materials Artillery 3D lists for it. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | On the maker's list of materials for this printer. | | PETG | Great | On the maker's list of materials for this printer. | | TPU & flexibles | Great | On the maker's list of materials for this printer. | | ABS & ASA | Great | On the maker's list of materials for this printer. | | Nylon (PA) | Great | On the maker's list of materials for this printer. | | Polycarbonate (PC) | Great | On the maker's list of materials for this printer. | | Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. | ## When to choose the Artillery 3D M1 Pro Choose the M1 Pro if you want an enclosed, actively heated printer for engineering materials at a price well below the big brands: Artillery lists it from $349. It is a less proven brand and we found no independent review of the M1 Pro. Artillery OS is based on Klipper but is a customised system, not unlocked Klipper, so do not count on a Klipper route to SimplyPrint. If you want a printer with a known SimplyPrint route and a large community, the Creality K2 or Bambu Lab P2S is the safer pick. ### Pros - Enclosed with active chamber heating up to 60 degrees C, a glass door and a carbon filter (Artillery). - A 320 degrees C hardened steel nozzle and a bed up to 120 degrees C, for PLA through ABS, ASA, PC and carbon-filled nylons (Artillery). - CoreXY with a 600 mm/s top speed, linear rails and a cast aluminium frame (Artillery). - An onboard camera that pauses the print when it sees a fault, and a 4.3-inch touchscreen (Artillery). - Artillery gives 55 dB with the door closed and under 45 dB in silent mode (Artillery). ### Cons - Runs a customised Artillery OS, not unlocked Klipper, and our facts mark both Klipper and OctoPrint as unknown or unlikely, so SimplyPrint support is not confirmed. - Wi-Fi is 2.4 GHz only and Bluetooth is not available (Artillery). - Ships from China with a flat $30 shipping fee, and customs may add duties (Artillery). - The multi-colour system was announced for a later date, so check whether it exists before buying for colour (Artillery). - No independent review found. ### Who it suits - Schools: Can work. Enclosed, filtered and quiet in silent mode, but SimplyPrint support is unconfirmed, so approval queueing is not assured. - Hobbyists: Good fit. An enclosed, heated-chamber printer for engineering materials at a low price, from a less proven maker. - Businesses: Can work. Capable materials, but a short track record, no independent review and no confirmed SimplyPrint route. - Print farms: Not a good fit. A customised OS with no confirmed remote-management route and an unproven track record make it a weak fleet choice. ## Printers like the Artillery 3D M1 Pro that work with SimplyPrint - [Bambu Lab P1S](https://simplyprint.io/compatibility/bambu-lab-p1s): Verified by SimplyPrint, 256 x 256 x 256 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [Bambu Lab P2S Combo](https://simplyprint.io/compatibility/bambu-lab-p2s-combo): Verified by SimplyPrint, 256 x 256 x 256 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled - [Creality K1 Max](https://simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [Creality K1C](https://simplyprint.io/compatibility/creality-k1c): Compatible, 220 x 220 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) ## Where to buy the Artillery 3D M1 Pro - [Artillery 3D's global store](https://simplyprint.io/buy/8255) (Official store): Out of stock at Artillery 3D (Checked October 23, 2026) ## About Artillery 3D Artillery is a Chinese consumer 3D printer brand founded in 2018; it says it is headquartered in Hong Kong. It is known for the Sidewinder, a large and inexpensive bed slinger, and the smaller Genius and Hornet. The Sidewinder X4 moved to Klipper in 2024, and the M1 Pro, an enclosed CoreXY on Artillery's Klipper-based Artillery OS, followed in 2025. Its buyers are mostly hobbyists on a budget. - Founded: 2018 - Headquarters: Hong Kong (company statement) - Website: https://www.artillery3d.com Openness: Mixed (3.3 of 5) Standard nozzles, OrcaSlicer support and a deep parts shop, but the current Klipper-based firmware is customised and its source is not published. - Firmware and custom firmware (2 of 5): Artillery published Marlin source for the Sidewinder X1 and X2, Genius and Hornet on GitHub (GPL-3.0, last updated 2022-2023), but we found no published source for the Klipper firmware of the X4 or M1 Pro. Asked whether the M1 Pro ships with unlocked Klipper, Artillery answers that it runs a 'customized Artillery OS'. - Local control and integrations (4 of 5): The X4 runs Klipper with Fluidd over Wi-Fi, and Artillery's M1 support guides refer to Fluidd as well, which implies Moonraker's documented API. Artillery says the M1 Pro prints over Wi-Fi and the local network and can be monitored locally through its slicer, and names no account requirement, but describes its system only as a 'customized Artillery OS' and says nothing about access for other software. - Third-party filament, slicers and parts (4 of 5): Any filament; OrcaSlicer includes Artillery profiles from the Sidewinder X1 to the X4 and M1 Pro, and the X3 and X4 use standard Volcano-type brass nozzles and V6 heatbreaks. The M1 Pro's own slicer is a custom OrcaSlicer build. - Repairs and spare parts (4 of 5): Artillery's shop sells parts one by one, down to screws, bearings, belts, motors, mainboards and screens, for the X2, X3, X4 and M1 series. It publishes no CAD files. - Data and privacy (3 of 5): Printing on the local network needs no account. Artillery's privacy policy is its web shop's and does not describe what the printers or their cameras send. - Community and documentation (3 of 5): Artillery runs an official wiki, a YouTube channel and a Facebook page; its GitHub firmware repositories have not been updated for the current models. ### Pros - Low prices for large bed slingers and an enclosed CoreXY. - Spare parts sold one by one, down to screws and belts. - OrcaSlicer has profiles for current models, so you are not tied to Artillery's slicer. - Prints over the local network without an Artillery account. ### Cons - No published source for the Klipper-based firmware on the X4 and M1 Pro. - A review Artillery republished found the X4's Klipper version dated. - The privacy policy covers the web shop, not the printers or cameras. - The Sidewinder X4 was out of stock in Artillery's EU shop in October 2026. ### Track record - 2025: Artillery launched the M1 Pro, an enclosed CoreXY on its Klipper-based Artillery OS with a custom OrcaSlicer build; asked if the firmware is unlocked Klipper, Artillery calls it a customised Artillery OS. - April 2024: The Sidewinder X4 Plus and X4 Pro moved from Marlin to Klipper with the Fluidd web interface; a review Artillery republished found the Klipper and component versions dated. - September 2021: Artillery published the Marlin source for the Sidewinder X2 and Genius Pro on GitHub, after the Hornet in April 2021. - November 2019: Artillery published the Marlin source for the Sidewinder X1 on GitHub; the Genius followed in December 2019. How Artillery 3D compares with every other brand: https://simplyprint.io/articles/best-3d-printer ## Frequently asked questions ### Is the Artillery 3D M1 Pro compatible with SimplyPrint? We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Artillery 3D M1 Pro, our compatibility check tells you in a few questions how it could connect. ### What slicer should I use for the Artillery 3D M1 Pro? None of the slicers in SimplyPrint's cloud can slice for the Artillery 3D M1 Pro that we know of: it doesn't take standard G-code. Use the slicer its maker recommends. ### What filament can the Artillery 3D M1 Pro print? Artillery 3D lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC) and Carbon-fiber & glass-filled for the M1 Pro. ### What is the Artillery 3D M1 Pro's bed size and build volume? The Artillery 3D M1 Pro has a 260 x 260 mm print bed and prints up to 260 mm tall, a build volume of about 260 x 260 x 260 mm. See the full specifications table above for bed type, temperatures and more. ### When did the Artillery 3D M1 Pro come out? Artillery 3D launched the M1 Pro in March 2025. ### Where can I buy the Artillery 3D M1 Pro? From Artillery 3D's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.