# Anycubic 3D printers and SimplyPrint Made by a company from China. We list 34 Anycubic printers. 31 of them work with SimplyPrint. 2 more are expected to. Each printer's page says how it connects, and how to set it up. ## Every Anycubic printer, the newest first - [Anycubic Kobra 3 Max V2 Combo](https://simplyprint.io/compatibility/anycubic-kobra-3-max-v2-combo): Expected to work like the Anycubic Kobra 3 Max Combo (launched September 2026) - [Anycubic Kobra 4](https://simplyprint.io/compatibility/anycubic-kobra-4): Not confirmed yet - help us find out (launched May 2026) - [Anycubic Kobra 4 Combo](https://simplyprint.io/compatibility/anycubic-kobra-4-combo): Not confirmed yet - help us find out (launched May 2026) - [Anycubic Kobra X](https://simplyprint.io/compatibility/anycubic-kobra-x): Compatible (launched March 2026) - [Anycubic Kobra X Combo](https://simplyprint.io/compatibility/anycubic-kobra-x-combo): Compatible (launched March 2026) - [Anycubic Kobra S1 Max Combo](https://simplyprint.io/compatibility/anycubic-kobra-s1-max-combo): Compatible (launched November 25, 2025) - [Anycubic Kobra S1 Max](https://simplyprint.io/compatibility/anycubic-kobra-s1-max): Compatible (launched November 25, 2025) - [Anycubic Kobra 3 V2](https://simplyprint.io/compatibility/anycubic-kobra-3-v2): Compatible (launched June 2025) - [Anycubic Kobra 3 V2 Combo](https://simplyprint.io/compatibility/anycubic-kobra-3-v2-combo): Compatible (launched May 2025) - [Anycubic Kobra 3 Max Combo](https://simplyprint.io/compatibility/anycubic-kobra-3-max-combo): Compatible (launched February 2025) - [Anycubic Kobra 3 Max](https://simplyprint.io/compatibility/anycubic-kobra-3-max): Compatible (launched February 2025) - [Anycubic Kobra S1](https://simplyprint.io/compatibility/anycubic-kobra-s1): Compatible (launched January 2, 2025) - [Anycubic Kobra S1 Combo](https://simplyprint.io/compatibility/anycubic-kobra-s1-combo): Compatible (launched January 2, 2025) - [Anycubic Kobra 3 Combo](https://simplyprint.io/compatibility/anycubic-kobra-3-combo): Compatible (launched May 7, 2024) - [Anycubic Kobra 3](https://simplyprint.io/compatibility/anycubic-kobra-3): Compatible (launched May 7, 2024) - [Anycubic Kobra 2 Neo](https://simplyprint.io/compatibility/anycubic-kobra-2-neo): Compatible (launched September 2023) - [Anycubic Kobra 2 Pro](https://simplyprint.io/compatibility/anycubic-kobra-2-pro): Compatible (launched September 2023) - [Anycubic Kobra 2 Plus](https://simplyprint.io/compatibility/anycubic-kobra-2-plus): Compatible (launched September 1, 2023) - [Anycubic Kobra 2](https://simplyprint.io/compatibility/anycubic-kobra-2): Compatible (launched May 2023) - [Anycubic Kobra 2 Max](https://simplyprint.io/compatibility/anycubic-kobra-2-max): Compatible (launched 2023) - [Anycubic Kobra Neo](https://simplyprint.io/compatibility/anycubic-kobra-neo): Compatible (launched September 2022) - [Anycubic Kobra Go](https://simplyprint.io/compatibility/anycubic-kobra-go): Compatible (launched September 2022) - [Anycubic Kobra Plus](https://simplyprint.io/compatibility/anycubic-kobra-plus): Compatible (launched June 15, 2022) - [Anycubic Kobra Max](https://simplyprint.io/compatibility/anycubic-kobra-max): Compatible (launched March 27, 2022) - [Anycubic Kobra](https://simplyprint.io/compatibility/anycubic-kobra): Compatible (launched March 27, 2022) - [Anycubic Mega SE](https://simplyprint.io/compatibility/anycubic-mega-se): Expected to work like the Anycubic i3 Mega S (launched October 2021) - [Anycubic Vyper](https://simplyprint.io/compatibility/anycubic-vyper): Compatible (launched June 10, 2021) - [Anycubic 4Max Pro 2.0](https://simplyprint.io/compatibility/anycubic-4max-pro-2-0): Compatible (launched November 2020) - [Anycubic Mega Zero 2.0](https://simplyprint.io/compatibility/anycubic-mega-zero-2-0): Compatible (launched October 2020) - [Anycubic Mega X](https://simplyprint.io/compatibility/anycubic-mega-x): Compatible (launched February 27, 2020) - [Anycubic Mega Zero](https://simplyprint.io/compatibility/anycubic-mega-zero): Compatible (launched 2020) - [Anycubic 4Max Pro](https://simplyprint.io/compatibility/anycubic-4max-pro): Compatible (launched June 2019) - [Anycubic Predator](https://simplyprint.io/compatibility/anycubic-predator): Compatible (launched May 2019) - [Anycubic i3 Mega S](https://simplyprint.io/compatibility/anycubic-i3-mega-s): Compatible (launched 2019) - [Anycubic Chiron](https://simplyprint.io/compatibility/anycubic-chiron): Compatible (launched August 2018) - [Anycubic 4Max](https://simplyprint.io/compatibility/anycubic-4max): Compatible (launched 2018) - [Anycubic i3 Mega](https://simplyprint.io/compatibility/anycubic-i3-mega): Compatible (launched 2017) - [Anycubic Kossel](https://simplyprint.io/compatibility/anycubic-kossel): Compatible (launched 2017) - [Anycubic Kossel (Linear Plus)](https://simplyprint.io/compatibility/anycubic-kossel-linear-plus): Compatible (launched 2017) - [Anycubic Kossel (Pulley)](https://simplyprint.io/compatibility/anycubic-kossel-pulley): Compatible (launched 2017) - [Anycubic Mega Pro](https://simplyprint.io/compatibility/anycubic-mega-pro): Compatible Compare them side by side: https://simplyprint.io/compatibility/compare?brand=anycubic Running a Anycubic print farm: https://simplyprint.io/print-farms/anycubic ## Anycubic's NFC spool tags Open: tags for any filament. SimplyPrint reads Anycubic's spool tags and writes them for any filament, so every brand works like Anycubic's own. https://simplyprint.io/features/filament-management/nfc/anycubic ## About Anycubic Anycubic is a Chinese 3D printer maker founded in 2015. It sells the Kobra line of FDM printers, including the enclosed Kobra S1 and S1 Max, the large Kobra 3 Max and the low-cost Kobra X, the ACE Pro multi-material unit and Photon resin printers. Its printers are aimed at hobbyists and home users at budget to mid-range prices. - Firmware and custom firmware: 3/5. The Kobra 3, 3 Max and S1 run Klipper-go, Anycubic's Go port of Klipper. Anycubic published its source with the kernel and U-Boot under GPL, for the Kobra 3 in October 2024 and for the wider family in October 2025, but says some proprietary features are kept closed, and that modifying the firmware voids the warranty. The community project Rinkhals adds Fluidd, Mainsail and SSH, and reports that the newer Kobra X only accepts signed updates. - Local control and integrations: 3/5. LAN mode lets Anycubic Slicer Next send prints, show progress and stream video on the local network without an account, and the S1's firmware 2.5.9.9 added sending from OrcaSlicer. With LAN mode on, the cloud, the app and AI failure detection are off, and the S1 must leave LAN mode and be bound to an account to update its firmware. Anycubic documents no local API for other software; Moonraker, Fluidd and Mainsail come only with the community firmware Rinkhals. - Third-party filament, slicers and parts: 3/5. Third-party filament works. Anycubic Slicer Next is an open-source OrcaSlicer fork, and recent firmware accepts files sent from OrcaSlicer. Hotends, extruders and many other parts are model-specific Anycubic parts. - Repairs and spare parts: 4/5. Anycubic's store sells hotends, extruders, motherboards, heated beds, motors and screens, and its wiki has replacement guides for current models, for example the Kobra S1 Max XY motors and the Kobra X Y-axis motor. - Data and privacy: 2/5. LAN mode keeps data on the local network, but the app and cloud need an account. Anycubic's privacy policy allows broad collection, including product usage, device signals and nearby Wi-Fi access points, and storage in the United States. In February 2024 a flaw in its cloud MQTT server let a third party push a file to Kobra 2 printers; Anycubic apologised and patched it. - Community and documentation: 3/5. Active user community and a wiki with guides and error codes for each model. Source releases leave proprietary parts closed, and custom firmware is a community effort. - October 2025: Anycubic published Klipper-go, its Go port of Klipper, as a standalone project for the Kobra 3, Kobra 3 V2, Kobra 3 Max and Kobra S1, with the MCU firmware, Linux kernel and U-Boot sources, on GitHub under GPL-3.0. It says some proprietary features remain closed. - October 2024: Anycubic published the Kobra 3 firmware sources (Klipper-go, MCU firmware, Linux kernel and U-Boot) on GitHub under GPL-3.0. - February 2024: A third party used a vulnerability in Anycubic's cloud MQTT server to make Kobra 2 Pro/Plus/Max printers download a file named 'hacked_machine_readme.gcode'. Anycubic counted 237 affected printers and over 2,000 that received the file, apologised for its late response, tightened cloud authorisation and released a firmware fix. ## Anycubic printers for print farms Running a print farm with SimplyPrint: https://simplyprint.io/print-farms/anycubic The best 3D printers for print farms: https://simplyprint.io/articles/best-3d-printer-for-print-farms ## Anycubic printers for education SimplyPrint for schools and universities: https://simplyprint.io/education The best 3D printers for schools: https://simplyprint.io/articles/best-3d-printers-for-schools ## Frequently asked questions ### Does Anycubic work with SimplyPrint? We list 34 Anycubic printers. 31 of them work with SimplyPrint. 2 more are expected to. Each printer's page says how it connects, and how to set it up. ### Does SimplyPrint work with Anycubic's NFC spool tags? SimplyPrint reads Anycubic's spool tags and writes them for any filament, so every brand works like Anycubic's own. ### How open is Anycubic? Mixed: 3.0 of 5 on our openness scale, rated from public sources on firmware, local control, filament and slicers, repairs, privacy and community. ### What is Anycubic's newest 3D printer? The Anycubic Kobra 3 Max V2 Combo, launched September 2026.