# Afinia H800+: specs, SimplyPrint compatibility and setup

> **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong.

- By Afinia, USA
- Launched 2015
- Afinia no longer makes or sells the Afinia H800+. That says nothing about SimplyPrint support: see below.
- Canonical page: https://simplyprint.io/compatibility/afinia-h800-plus

## Afinia H800+ at a glance

The Afinia H800+ is a 3D printer by Afinia with a 255 x 205 x 205 mm build volume.

- Build volume: 255 x 205 x 205 mm
- Enclosure: Fully enclosed
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA)
- Connectivity: USB, Wi-Fi

## Connect the Afinia H800+ to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not expected to work |  |  |
| OctoPrint (Directly, over USB) | Not expected to work |  | Prints jobs sent from Afinia Studio (STL/UP3) over USB or Wi-Fi, not G-code over serial. ([Source](https://cdn.shopify.com/s/files/1/0743/5236/1782/files/AfiniaH800-3D-Printer-UsersManual.pdf)) |
| Klipper (Moonraker) | Not compatible |  | Ships Tiertime's closed firmware, not Klipper. ([Source](https://cdn.shopify.com/s/files/1/0743/5236/1782/files/AfiniaH800-3D-Printer-UsersManual.pdf)) |

## What slicer to use for the Afinia H800+

None of the slicers in SimplyPrint's cloud can slice for the Afinia H800+ that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Afinia H800+ · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Afinia H800+ · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Afinia H800+ · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Afinia H800+ · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Afinia H800+ · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Afinia H800+ · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Afinia H800+ · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Afinia H800+.

## Afinia H800+ specifications: bed size, print height and more

### Size

- Build volume: 255 x 205 x 205 mm
- Bed type: Rectangle
- Bed size: 255 x 205 mm
- Max print height: 205 mm

### Printing

- Enclosure: Fully enclosed
- Max extruder temperature: 260 °C
- Has heated bed: Yes
- Max bed temperature: 100 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Connecting

- Connectivity: USB, Wi-Fi
- Supports serial printing: Unknown
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Afinia
- Printer model name: H800+
- Made by a company from: USA
- Launched: 2015
- Still made: No, discontinued

[Read more by the manufacturer](https://web.archive.org/web/20230930003544/https://afinia.com/3d-printers/h800/)

## What filament can the Afinia H800+ print?

Filament compatibility for the Afinia H800+: the materials Afinia lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Good | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

## Printers like the Afinia H800+ that work with SimplyPrint

- [Creality K1C](https://simplyprint.io/compatibility/creality-k1c): Compatible, 220 x 220 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)
- [Creality K1](https://simplyprint.io/compatibility/creality-k1): Compatible, 220 x 220 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)
- [Anycubic Kobra S1](https://simplyprint.io/compatibility/anycubic-kobra-s1): Compatible, 250 x 250 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)
- [Prusa CORE One](https://simplyprint.io/compatibility/prusa-core-one): Compatible, 250 x 220 x 270 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)

## What to buy instead of the Afinia H800+

Afinia no longer makes or sells the H800+ new. These printers like it are on sale today, and work with SimplyPrint.

- [Creality K1C](https://simplyprint.io/compatibility/creality-k1c): Similar build volume · Also prints ABS & ASA, Nylon (PA) ([Buy from Creality](https://simplyprint.io/buy/7950), Affiliate link)
- [Creality K1](https://simplyprint.io/compatibility/creality-k1): Similar build volume · Also prints ABS & ASA, Nylon (PA) ([Buy from Creality](https://simplyprint.io/buy/7953), Affiliate link)
- [Anycubic Kobra S1](https://simplyprint.io/compatibility/anycubic-kobra-s1): Similar build volume · Also prints ABS & ASA, Nylon (PA) ([Buy from Anycubic](https://simplyprint.io/buy/4664), Affiliate link): $401.00 (Price at Anycubic, checked October 12, 2026)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the Afinia H800+ compatible with SimplyPrint?

To our knowledge the Afinia H800+ is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

### What slicer should I use for the Afinia H800+?

None of the slicers in SimplyPrint's cloud can slice for the Afinia H800+ that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the Afinia H800+ print?

Afinia lists PLA, ABS & ASA, PETG and TPU & flexibles for the H800+.

### What is the Afinia H800+'s bed size and build volume?

The Afinia H800+ has a 255 x 205 mm print bed and prints up to 205 mm tall, a build volume of about 255 x 205 x 205 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Afinia H800+ come out?

Afinia launched the H800+ in 2015. It has since been discontinued, so you can't buy it new from Afinia any more.

### Is the Afinia H800+ still sold?

No. Afinia no longer makes or sells the H800+ new. Printers like it you can buy today: Creality K1C, Creality K1 and Anycubic Kobra S1.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.