# Afinia H+1: specs, SimplyPrint compatibility and setup

> **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong.

- By Afinia, USA
- Launched 2019
- Canonical page: https://simplyprint.io/compatibility/afinia-h-plus1

## Afinia H+1 at a glance

The Afinia H+1 is a 3D printer by Afinia with a 205 x 255 x 225 mm build volume.

- Build volume: 205 x 255 x 225 mm
- Enclosure: Fully enclosed
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)
- Connectivity: USB, Wi-Fi, Ethernet

## Connect the Afinia H+1 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not expected to work |  |  |
| OctoPrint (Directly, over USB) | Not expected to work |  | Prints jobs from Afinia Studio in its own UP3/tsk format over USB, Wi-Fi or Ethernet, not G-code over serial. ([Source](https://cdn.shopify.com/s/files/1/0743/5236/1782/files/H1_User_Manual_EN_V1.3a-1.pdf)) |
| Klipper (Moonraker) | Not compatible |  | Ships Tiertime's closed firmware, not Klipper. ([Source](https://cdn.shopify.com/s/files/1/0743/5236/1782/files/H1_User_Manual_EN_V1.3a-1.pdf)) |

## What slicer to use for the Afinia H+1

None of the slicers in SimplyPrint's cloud can slice for the Afinia H+1 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Afinia H+1 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Afinia H+1 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Afinia H+1 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Afinia H+1 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Afinia H+1 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Afinia H+1 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Afinia H+1 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Afinia H+1.

## Afinia H+1 specifications: bed size, print height and more

### Size

- Build volume: 205 x 255 x 225 mm
- Bed type: Rectangle
- Bed size: 205 x 255 mm
- Max print height: 225 mm

### Printing

- Enclosure: Fully enclosed
- Max extruder temperature: 299 °C
- Has heated bed: Yes
- Max bed temperature: 100 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: USB, Wi-Fi, Ethernet
- Prints from: USB stick
- Supports serial printing: Unknown
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Afinia
- Printer model name: H+1
- Made by a company from: USA
- Launched: 2019

[Read more by the manufacturer](https://web.archive.org/web/20240109104253/https://afinia.com/3d-printers/h-plus-1/)

## What filament can the Afinia H+1 print?

Filament compatibility for the Afinia H+1: the materials Afinia lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Good | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

## Printers like the Afinia H+1 that work with SimplyPrint

- [FrankenVoron Tridex](https://simplyprint.io/compatibility/frankenvoron-tridex): Expected to work, 225 x 250 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [SnakeOil-XY SnakeOil-XY](https://simplyprint.io/compatibility/snakeoil-xy-snakeoil-xy): Compatible, 250 x 240 x 230 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Bambu Lab P1S](https://simplyprint.io/compatibility/bambu-lab-p1s): Verified by SimplyPrint, 256 x 256 x 256 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Bambu Lab P2S Combo](https://simplyprint.io/compatibility/bambu-lab-p2s-combo): Verified by SimplyPrint, 256 x 256 x 256 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Frequently asked questions

### Is the Afinia H+1 compatible with SimplyPrint?

To our knowledge the Afinia H+1 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

### What slicer should I use for the Afinia H+1?

None of the slicers in SimplyPrint's cloud can slice for the Afinia H+1 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the Afinia H+1 print?

Afinia lists PLA, PETG, TPU & flexibles, ABS & ASA and Polycarbonate (PC) for the H+1.

### What is the Afinia H+1's bed size and build volume?

The Afinia H+1 has a 205 x 255 mm print bed and prints up to 225 mm tall, a build volume of about 205 x 255 x 225 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Afinia H+1 come out?

Afinia launched the H+1 in 2019.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.