# 3DGence INDUSTRY F421: specs, SimplyPrint compatibility and setup

> **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong.

- By 3DGence
- Launched February 2022
- Canonical page: https://simplyprint.io/compatibility/3dgence-industry-f421

## 3DGence INDUSTRY F421 at a glance

The 3DGence INDUSTRY F421 is a 3D printer by 3DGence with a 380 x 380 x 420 mm build volume.

- Build volume: 380 x 380 x 420 mm
- Enclosure: Fully enclosed
- Max print speed: 400 mm/s
- Prints well: PLA, PETG, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- Built-in camera: Yes
- Connectivity: Wi-Fi, Ethernet, USB

## Connect the 3DGence INDUSTRY F421 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not expected to work |  |  |
| Klipper (Moonraker) | Not expected to work |  | Closed industrial machine run through 3DGence's own controller and CONNECT software; nothing points to Klipper. ([Source](https://3dgence.com/en/3d-printers-hp-if-600-ht/)) |
| OctoPrint (Directly, over USB) | Not expected to work |  | Takes jobs over Ethernet, Wi-Fi or a USB drive; no USB port for a computer is documented. ([Source](https://web.archive.org/web/2022/https://3dgence.com/3d-printers/industry-f421/)) |

## What slicer to use for the 3DGence INDUSTRY F421

None of the slicers in SimplyPrint's cloud can slice for the 3DGence INDUSTRY F421 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the 3DGence INDUSTRY F421 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the 3DGence INDUSTRY F421 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the 3DGence INDUSTRY F421 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the 3DGence INDUSTRY F421 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the 3DGence INDUSTRY F421 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the 3DGence INDUSTRY F421 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the 3DGence INDUSTRY F421 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the 3DGence INDUSTRY F421.

## 3DGence INDUSTRY F421 specifications: bed size, print height and more

### Size

- Build volume: 380 x 380 x 420 mm
- Bed type: Square
- Bed size: 380 x 380 mm
- Max print height: 420 mm

### Printing

- Enclosure: Fully enclosed
- Max print speed: 400 mm/s
- Max extruder temperature: 500 °C
- Has heated bed: Yes
- Max bed temperature: 180 °C
- Heated chamber: Up to 195 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Connecting

- Connectivity: Wi-Fi, Ethernet, USB
- Built-in camera: Yes
- Prints from: USB stick
- Supports serial printing: Unknown
- Shipped firmware: Unknown

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: 3DGence
- Printer model name: INDUSTRY F421
- Launched: February 2022

[Read more by the manufacturer](https://3dgence.com/en/3d-printers-hp-if-600-ht/)

## What filament can the 3DGence INDUSTRY F421 print?

Filament compatibility for the 3DGence INDUSTRY F421: the materials 3DGence lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
| High-temperature (PEI, PEEK, PEKK) | Great | On the maker's list of materials for this printer. |

## Printers like the 3DGence INDUSTRY F421 that work with SimplyPrint

- [Creality K2 Plus Combo](https://simplyprint.io/compatibility/creality-k2-plus-combo): Compatible, 350 x 350 x 350 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [FLSUN S1](https://simplyprint.io/compatibility/flsun-s1): Compatible, 320 x 320 x 430 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Mattershaper Multiplexer](https://simplyprint.io/compatibility/mattershaper-multiplexer): Compatible, 520 x 300 x 400 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Fusion3 EDGE](https://simplyprint.io/compatibility/fusion3-edge): Compatible, 368 x 368 x 343 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Frequently asked questions

### Is the 3DGence INDUSTRY F421 compatible with SimplyPrint?

To our knowledge the 3DGence INDUSTRY F421 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

### What slicer should I use for the 3DGence INDUSTRY F421?

None of the slicers in SimplyPrint's cloud can slice for the 3DGence INDUSTRY F421 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the 3DGence INDUSTRY F421 print?

3DGence lists ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the INDUSTRY F421.

### What is the 3DGence INDUSTRY F421's bed size and build volume?

The 3DGence INDUSTRY F421 has a 380 x 380 mm print bed and prints up to 420 mm tall, a build volume of about 380 x 380 x 420 mm. See the full specifications table above for bed type, temperatures and more.

### When did the 3DGence INDUSTRY F421 come out?

3DGence launched the INDUSTRY F421 in February 2022.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.