# 3DGence INDUSTRY F350: specs, SimplyPrint compatibility and setup

> **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong.

- By 3DGence
- Launched March 2021
- Canonical page: https://simplyprint.io/compatibility/3dgence-industry-f350

## 3DGence INDUSTRY F350 at a glance

The 3DGence INDUSTRY F350 is a 3D printer by 3DGence with a 340 x 340 x 350 mm build volume.

- Build volume: 340 x 340 x 350 mm
- Enclosure: Fully enclosed
- Max print speed: 400 mm/s
- Prints well: PLA, PETG, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- Built-in camera: Yes
- Connectivity: Wi-Fi, Ethernet, USB

## Connect the 3DGence INDUSTRY F350 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not expected to work |  |  |
| Klipper (Moonraker) | Not expected to work |  | Closed industrial machine run through 3DGence's own controller and CONNECT software; nothing points to Klipper. ([Source](https://web.archive.org/web/20221128153144/https://3dgence.com/3d-printers/industry-f350/)) |
| OctoPrint (Directly, over USB) | Not expected to work |  | Takes jobs over Ethernet, Wi-Fi or a USB drive; no USB port for a computer is documented. ([Source](https://web.archive.org/web/20221128153144/https://3dgence.com/3d-printers/industry-f350/)) |

## What slicer to use for the 3DGence INDUSTRY F350

None of the slicers in SimplyPrint's cloud can slice for the 3DGence INDUSTRY F350 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the 3DGence INDUSTRY F350 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the 3DGence INDUSTRY F350 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the 3DGence INDUSTRY F350 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the 3DGence INDUSTRY F350 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the 3DGence INDUSTRY F350 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the 3DGence INDUSTRY F350 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the 3DGence INDUSTRY F350 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the 3DGence INDUSTRY F350.

## 3DGence INDUSTRY F350 specifications: bed size, print height and more

### Size

- Build volume: 340 x 340 x 350 mm
- Bed type: Square
- Bed size: 340 x 340 mm
- Max print height: 350 mm

### Printing

- Enclosure: Fully enclosed
- Max print speed: 400 mm/s
- Max extruder temperature: 500 °C
- Has heated bed: Yes
- Max bed temperature: 160 °C
- Heated chamber: Up to 140 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Connecting

- Connectivity: Wi-Fi, Ethernet, USB
- Built-in camera: Yes
- Prints from: USB stick
- Supports serial printing: Unknown
- Shipped firmware: Unknown

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: 3DGence
- Printer model name: INDUSTRY F350
- Launched: March 2021

[Read more by the manufacturer](https://web.archive.org/web/20221128153144/https://3dgence.com/3d-printers/industry-f350/)

## What filament can the 3DGence INDUSTRY F350 print?

Filament compatibility for the 3DGence INDUSTRY F350: the materials 3DGence lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
| High-temperature (PEI, PEEK, PEKK) | Great | On the maker's list of materials for this printer. |

## Printers like the 3DGence INDUSTRY F350 that work with SimplyPrint

- [Creality K1 Max](https://simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Voron Voron Trident](https://simplyprint.io/compatibility/voron-voron-trident): Compatible, 350 x 350 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Vivedino Troodon 2.0](https://simplyprint.io/compatibility/vivedino-troodon-2-0): Compatible, 350 x 350 x 320 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [QIDI i-fast](https://simplyprint.io/compatibility/qidi-i-fast): Compatible, 330 x 250 x 320 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Frequently asked questions

### Is the 3DGence INDUSTRY F350 compatible with SimplyPrint?

To our knowledge the 3DGence INDUSTRY F350 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

### What slicer should I use for the 3DGence INDUSTRY F350?

None of the slicers in SimplyPrint's cloud can slice for the 3DGence INDUSTRY F350 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the 3DGence INDUSTRY F350 print?

3DGence lists PLA, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the INDUSTRY F350.

### What is the 3DGence INDUSTRY F350's bed size and build volume?

The 3DGence INDUSTRY F350 has a 340 x 340 mm print bed and prints up to 350 mm tall, a build volume of about 340 x 340 x 350 mm. See the full specifications table above for bed type, temperatures and more.

### When did the 3DGence INDUSTRY F350 come out?

3DGence launched the INDUSTRY F350 in March 2021.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.