# SimplyPrint changelog 2020

Canonical HTML: https://simplyprint.io/changelog/2020

## Merry Christmas from SimplyPrint (2020-12-22) https://simplyprint.io/blog/merry-christmas-from-simplyprint/

### New features
- **Printer livestream from anywhere**: Watch your printer when you are not at home, with a new picture as often as once a second depending on your plan.
- **3D print troubleshooting**: A [troubleshooting guide](https://simplyprint.io/print-troubleshoot) with 18 articles on solving common print problems.
- **Mark prints as failed, and rate the good ones**: When a print finishes, say whether it came out well or failed, and rate a good one 1 to 4. When you stop a print, say whether it failed or you changed your mind. Print jobs and Statistics show the difference.
- **Printer error detection**: SimplyPrint notices when a print stopped because of a printer error, tells you, and suggests what the cause could be.

### Improvements
- **Slicer**: A round of slicer improvements. Smart rotate places models the right way up, so there is no more rotating by hand.

## simplyprint.dk becomes simplyprint.io (2020-11)

Milestone. We move to simplyprint.io as we get ready to go international.

## Send G-code to several printers at once (2020-10-23)

### Improvements
- **Send G-code**: Reworked: send G-code to several printers at once, and test your G-code profiles more easily. The G-code profiles page has an intro guide.

## Printer pictures (2020-10-21)

### New features
- **Printer pictures**: Swap the standard silhouette for your printer's product photo, or on the Advanced plan upload a picture of your own.

## Filament types, filament sensor & more (2020-10-08) https://simplyprint.io/blog/filament-types-filament-sensor-more/

### New features
- **Custom filament types**: Edit the standard filament types or create your own under Filament settings. They set the temperatures used for bed leveling, filament changes and preheating.
- **Filament sensor support**: A filament sensor plugged into your Raspberry Pi now works with SimplyPrint: the print pauses when filament runs out, and you get a notification.

### Improvements
- **Statistics page**: Reworked from the ground up: follow your printing habits, see how much filament you have used, and get statistics per printer.
- **Preheat**: A side button on Preheat heats only the hotend or only the bed, or heats for any of your filament types.
- **Raspberry Pi software and OctoPrint plugin**: A large update with bug fixes and general improvements, most noticeable during setup.

## Mesh Bed Leveling update (2020-08-29) https://simplyprint.io/blog/mesh-bed-leveling-update/

### New features
- **Mesh bed leveling**: Printers with BL-Touch and other probing tools can start mesh bed leveling from SimplyPrint and see the bed mesh as a graph.
- **News in the panel**: Bigger updates now pop up when you log in, and older news is under the newspaper icon in the top bar.

## The built-in slicer slices straight from your files (2020-07-29)

### New features
- **Slice from your files**: Our built-in slicer, still in active development, now slices straight from your files: click "Slice" on a file in the file system, and save sliced files from the slicer straight back into it.

## G-code analysis: print anyway, skip it or turn it off (2020-07-20)

### Improvements
- **G-code analysis is yours to overrule**: Start a print even when the analysis says no or fails, skip the analysis for large files, or turn it off entirely.

## Open to everyone in Denmark (2020-07-04)

Milestone. After the closed alpha, SimplyPrint opens in beta to everyone in Denmark.

## Filament: temperatures and speed per spool, sorting and clearer colours (2020-07-02)

### New features
- **Temperatures and speed per spool**: Set the nozzle temperature, bed temperature and print speed for each spool of filament.

### Improvements
- **Sort your filament**: The filament list can be sorted.
- **Filament colours**: Choosing a spool's colour is clearer.

## Security: see and log out your devices (2020-06-21)

### New features
- **Logged-in devices**: Under Your account > Security, see every device you are logged in on and log out any one of them.

## Settings: stop reasons, notification choices and printer screen text (2020-05-31)

### New features
- **Reason for stopping a print**: When you stop a print, pick a reason and add a comment.

### Improvements
- **Notification choices**: Decide which notifications you get from your prints.
- **Printer screen**: Adjust what SimplyPrint shows on your printer's LCD screen.
- **No print without filament**: A setting stops a print from starting when the printer has no filament assigned, or when the spool has run out.

## Print notifications, printer settings and "Add printer" in the menu (2020-05-23)

### New features
- **Print notifications**: Get an email or an SMS with news about your print.

### Improvements
- **Printer settings**: Set your printer's bed size, maximum temperature and more.
- **Add printer**: "Add printer" is always there in the menu bar.

## Closed alpha, round 2 (2020-05-15)

Milestone. Sign-ups open for a second round of alpha testers in Denmark.

## Closed alpha, round 1 (2020-04-22)

Milestone. Our first alpha testers in Denmark start using SimplyPrint on their own printers.