--- title: "Best Filament for Print Farms in 2026: What Farms Actually Run" slug: best-filament-for-print-farms description: The best filament for print farms in 2026, ranked on what print farms on SimplyPrint actually stock and print, big spools and refills, multi-material units and slicer profiles. target_keyword: best filament for print farm secondary_keywords: - print farm filament - filament for 3d print farm audience: farms category: comparisons filament_guide: farm tags: - filament - print farm - buying guide schema: TechArticle last_modified: 2026-10-20 published: 2026-10-20 author: simplyprint og_image: https://cdn.simplyprint.io/i/landing/articles/best-filament-for-print-farms/og.jpg og_image_alt: "The best filament for print farms: spools in black, white and grey" tldr: | The best print farm filament is the one farms keep buying: consistent from spool to spool, on big spools or refills, and fed through a multi-material unit without trouble. This guide ranks it on something only SimplyPrint can see: what the print farms on SimplyPrint actually stock and print, counted together across farms. related_articles: - best-3d-printer-for-print-farms - how-to-start-a-3d-print-farm faq: - q: Should a print farm use one filament? a: | For each material, mostly yes. One PLA and one PETG you know well means one set of profiles and predictable failures. Keep a second brand you trust for when the first is out of stock. - q: Are refills and big spools worth it for a farm? a: | Often. A 2 to 5 kg spool or a refill without a spool costs less per kilogram and means fewer spool changes, as long as your printers or holders take them. - q: How does SimplyPrint help a farm with filament? a: | SimplyPrint tracks every spool, deducts what each print uses, warns before a spool runs out, and reads or writes NFC tags so a spool is identified with one scan. --- A print farm runs on filament the way a car runs on fuel: the right one is boring. It prints the same from spool to spool, it's in stock when you reorder, and it doesn't jam a multi-material unit at three in the morning. Other rankings test a spool or two. This one ranks on what print farms on SimplyPrint actually stock and print, counted together across farms, with the [Open Filament Database](/open-filament-database)'s facts. ## Our picks: the best filament for print farms in 2026 PLA, PETG, ABS and ASA lines, one per brand, ranked on the score below. Every reason is read from the data; a farm count shows only once enough farms use it. 1. **[Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic)** (score 100 of 100): Bambu Lab PLA Basic is PLA filament by Bambu Lab, a brand from China. Print it with the nozzle at 190-230 °C and the bed at 35-45 °C. It comes in 31 colours, on 1 kg spools. Stocked or printed by 1,000+ accounts on SimplyPrint; Ready-made profiles in OrcaSlicer, BambuStudio, ElegooSlicer, CrealityPrint; Tagged spools: Bambu Lab; 31 colours. 2. **[ELEGOO RAPID PETG](https://simplyprint.io/filaments/elegoo/rapid-petg)** (score 94 of 100): ELEGOO RAPID PETG is PETG filament by ELEGOO, a brand from China. Print it with the nozzle at 220-250 °C and the bed at 75-91 °C. It comes in 13 colours, on 250 g, 1 kg and 3 kg spools. Stocked or printed by 100+ accounts on SimplyPrint; Ready-made profiles in PrusaSlicer, OrcaSlicer, ElegooSlicer; Tagged spools: ELEGOO Canvas; 13 colours. 3. **[SUNLU PETG](https://simplyprint.io/filaments/sunlu/petg)** (score 92 of 100): SUNLU PETG is PETG filament by SUNLU, a brand from China. Print it with the nozzle at 220-250 °C and the bed at 70-90 °C. It comes in 39 colours, on 250 g, 500 g, 1 kg, 2 kg, 3 kg and 5 kg spools. Stocked or printed by 100+ accounts on SimplyPrint; Ready-made profiles in PrusaSlicer, OrcaSlicer, BambuStudio, ElegooSlicer; 39 colours. 4. **[eSUN 3D PLA+](https://simplyprint.io/filaments/esun-3d/pla-plus)** (score 92 of 100): eSUN 3D PLA+ is PLA filament by eSUN 3D, a brand from China. Print it with the nozzle at 190-230 °C and the bed at 50-70 °C. It comes in 51 colours, on 1 kg and 3 kg spools. Stocked or printed by 100+ accounts on SimplyPrint; Ready-made profiles in OrcaSlicer, BambuStudio, ElegooSlicer, CrealityPrint; 51 colours. 5. **[Creality Hyper PLA](https://simplyprint.io/filaments/creality/hyper-pla)** (score 82 of 100): Creality Hyper PLA is PLA filament by Creality, a brand from China. Print it with the nozzle at 190-230 °C and the bed at 25-61 °C. It comes in 15 colours, on 1 kg spools. Stocked or printed by 100+ accounts on SimplyPrint; Ready-made profiles in OrcaSlicer, ElegooSlicer; Tagged spools: Creality CFS; 15 colours. ## Print farm filament, ranked | # | Filament | Score | Material | Nozzle | |---|---|---|---|---| | 1 | [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic) | 100 | PLA | 190-230 °C | | 2 | [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte) | 99 | PLA | 190-230 °C | | 3 | [Bambu Lab ABS](https://simplyprint.io/filaments/bambu-lab/abs) | 97 | ABS | 240-270 °C | | 4 | [Bambu Lab PETG Translucent](https://simplyprint.io/filaments/bambu-lab/petg-translucent) | 97 | PETG | 230-270 °C | | 5 | [Bambu Lab PETG HF](https://simplyprint.io/filaments/bambu-lab/petg-hf) | 94 | PETG | 230-260 °C | | 6 | [ELEGOO RAPID PETG](https://simplyprint.io/filaments/elegoo/rapid-petg) | 94 | PETG | 220-250 °C | | 7 | [SUNLU PETG](https://simplyprint.io/filaments/sunlu/petg) | 92 | PETG | 220-250 °C | | 8 | [eSUN 3D PLA+](https://simplyprint.io/filaments/esun-3d/pla-plus) | 92 | PLA | 190-230 °C | | 9 | [Bambu Lab ASA](https://simplyprint.io/filaments/bambu-lab/asa) | 87 | ASA | 240-270 °C | | 10 | [Bambu Lab PETG Basic](https://simplyprint.io/filaments/bambu-lab/petg-basic) | 87 | PETG | 230-260 °C | | 11 | [Bambu Lab PLA Metal](https://simplyprint.io/filaments/bambu-lab/pla-metal) | 87 | PLA | 190-230 °C | | 12 | [ELEGOO PLA](https://simplyprint.io/filaments/elegoo/pla) | 87 | PLA | 190-220 °C | | 13 | [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla) | 87 | PLA | 190-230 °C | | 14 | [Bambu Lab PLA Silk+](https://simplyprint.io/filaments/bambu-lab/pla-silk-plus) | 84 | PLA | 210-240 °C | | 15 | [Bambu Lab PLA Translucent](https://simplyprint.io/filaments/bambu-lab/pla-translucent) | 84 | PLA | 200-240 °C | ## What a farm needs from filament ### Consistency, then price A cheaper spool that fails one print in twenty costs more than it saves. Choose on how it prints first, then on the price per kilogram. ### Big spools, refills and stock Fewer spool changes means fewer stops. Check that the line comes on big spools or as refills, and that a shop near you keeps it in stock. ### Know what's on every printer With dozens of printers, the hard part is knowing which spool is where and how much is left. SimplyPrint's [filament management](/features/filament-management) tracks every spool and [NFC tags](/features/filament-management/nfc) identify one with a scan. ## How we choose - How many print farms on SimplyPrint run it: 40 points - Sold by a shop we link to: 15 points - How many SimplyPrint accounts stock and print it: 10 points - Big spools or refills: 10 points - Slicer profiles of its own: 10 points - Feeds through a multi-material unit: 10 points - NFC or RFID tags on the maker's spools: 5 points